CTC advanced GmbH

Testing laboratory in Saarbrücken, Germany

Verified

Founded in 1998 as an independent and accredited test lab, CTC advanced GmbH has 20 years of experience in consulting, testing and certification.
We serve customers from nearly any industry, whether it be A like Automotive over B like Battery,
M like Medical Technology and P like Payment to Z like Zigbee.
With our up-to-date test capabilities and our huge range of services and covered standards, we are able to support you with almost any product you can think of. Continuous investments in measuring instruments, advanced training of employees or recently in construction work are saving the market position of CTC advanced for the future. In 2018 we employ around 180 people, who are keen on engineering or administration and we are still expanding.
But CTC advanced provides more than just testing. We are able to support you at every stage of product development. As a member of numerous international bodies and industrial forums, CTC advanced is also actively involved in the international standardization process of technologies. Our service goes far beyond verifying and certifying products. We support customers in setting and evolving the performance during Research and Development, ensuring that products meet expectations for regulatory, quality, health, environmental and safety standards for almost any markets around the world.
Whether if it is product certification or long-term business improvement solutions: CTC advanced helps you to achieve your goals. We know the regulatory hurdles you face before you can launch your product on the market and we offer a wide range of services and solutions to help you in the planning of your product testing and in the complete approval process in these increasingly complex regulatory issues of the international market. Our established contacts to national and international authorities provided by our experts in the area surrounding certification, assist you in launching your product within the global market.



Please visit our Website for further Information:
www.ctcadvanced.com

Or find some of our Services below:

Modern life is unthinkable without data transmission by means of radio waves. The telecommunication market is a dynamic industry which develops at a high pace. High speed digital transmission of data and speech by radio and satellite is of increasing importance in our rapidly advancing global communications network.

Radio communication systems must comply with the technical standards of each country or community. CTC advanced has the necessary know-how, accredited laboratories (DIN EN ISO/IEC 17025) and state-of-the-art measuring equipment to support the development and compliance testing of electronic devices with integrated radio technology. Our test scope covers many traditional and new radio technologies such as Bluetooth®, Satellite Radio, LoRa, Microwave Radio Relay, SRD, Wi-Fi®, ZigBee and many more.

Beneath Radio testing CTC advanced’s portfolio also includes EMC and Electrical Safety Testing as well as the Type Approval in more than 180 countries to ensure a smooth market access.

CTC advanced offers comprehensive automotive EMC and radio testing as well as environmental simulation and battery testing. Our services are particularly focused on car sub-assemblies and are in accordance with the regulatory directives or tailored to individual requirements of the automotive industry.

Regulatory EMC and Radio testing (including e-mark / E-mark)
Equipment which uses radio technologies or telecommunication devices for car integration must fulfill various standards and schemes depending on the target country referring to electromagnetic compatibility (EMC) and Radio requirements. CTC advanced offers the current regulatory standards for intended use in cars and vehicles with both EMC and Radio in mind regardless in which country you would like to launch your product.
The ‘e-mark’ is the proof of compliance with the directives set by the European Union (CE). The ‘E-mark’ is based on ECE regulations issued by the Economic Commission for Europe. The testing procedures may only be conducted by laboratories which are accredited by the respective national authorities. CTC advanced is accredited by KBA and SNCH to conduct the EMC tests and issue the technical report for the type approval.

More than regulatory testing – Requirements of the automobile industry
Product liability and risk management play a major part in the automobile industry. In addition to the regulatory testing CTC advanced is able to create specific test plans and conduct the corresponding EMC tests following customized requirements of the automobile industry for the special use, as for example agriculture and forestry or construction machines.

CTC advanced also offers testing services for environmental simulation, specially equipped for the requirements of the automobile industry. In the state-of-the-art battery test centre CTC advanced supports battery and car manufacturers in the safety qualification of high-capacity Li-ion battery systems. Of course Car2x-Communication in not a loanword for us.

Testing for electromagnetic compatibility (EMC) is a mandatory requirement for any globally launched product with integrated electrical and electronic devices. All electrical equipment must be interference free, able to function properly in the presence of electromagnetic disturbances. EMC applies to all electrical devices or appliances whatever industry or product line your product belongs to. To ensure that electromagnetic emission levels are kept within certain limits the governing bodies of each country/region have set their own EMC requirements that must be met in order to receive an approval to be released to the respective market. CTC advance has the experience and the state-of-the art test facilities to prepare your product for worldwide markets.

Regulatory EMC Testing
CTC advanced offers comprehensive EMC testing services according to the EMC compatibility requirements of Europe, the United States, Canada, Japan and Australia, China and Saudi-Arabia. EMC test reports issued by CTC advanced are recognized by official bodies, regulatory agencies and governments throughout the world.

International harmonized standards
•Europe (CE, CENELEC, ETSI, VDE, GCF)
•USA (FCC, CTIA, PTCRB )
•Canada (ISED)
•Japan (VCCI)
•Australia (ACMA)
•China (TMC)
•Saudi-Arabia (SASO)

International Directives and Guidelines
•RE Directive (2014/53/EU)
•EMC Directive (2014/30/EU)
•Medical Device Directive (93/42/EEC)
•In Vitro Diagnostic Directive (98/79/EC)
•UN ECE R10, Rev. 5
•Conformity Assessment Body (CAB) for US (FCC) and Canada (ISED)

Besides global EMC compliance testing CTC advanced´s accredited EMC laboratories are fully equipped to conduct various types of customized EMC testing including emissions, immunity, conducted vehicle transients or ESD (electrostatic discharge). Specific EMC performance test procedures can be defined upon customer requests.
Electrical safety is one of the basic requirements your product has to fulfil if you want to place it on the market. Current standards define essential requirements to demonstrate conformity regarding stress tests like mechanical or heat hazards. The IEC/EN standards define the European standards, in addition the CB Scheme presents a global solution for market access to presently (2017) 53 international member bodies. For the US and Canadian market an NRTL approval is required. All those schemes are available at CTC advanced.

For the assessment of products we apply the respective standards, such as EN 62368 (succeeding EN 60950) and the related documents including but by far not limited to EN 62133, which defines safety rules for batteries incorporated in products.

The referring safety tests consist of:
•Energy hazards
•Fire
•Mechanical and heat hazards
•Radiation hazards
•Chemical hazards

CTC advanced conducts tests like for example:
•Electric strength
•Leakage current
•Resistance to fire
•Protection from electric shock
•Protection from energy hazards
•Physical and constructive requirements
Many products are exposed to environmental influences like vibrations and mechanical impact during their transport or operation. Very often they must also withstand thermal influences, humidity or excessive sun exposure.

Through simulation of changing environmental conditions CTC advanced´s environmental test lab can examine whether components of all kinds meet the necessary conformity requirements regarding safety and working conditions. Environmental tests can be carried out on nearly every industrial material and are important to companies across all sectors, whether Automotive, Medical, Consumer Electronics or Household appliances.
CTC advanced supports battery and car manufacturers in the safety qualification of high-capacity Li-Ion battery systems.
The safety of lithium-ion batteries, especially for use in electric vehicles and energy storage systems is very important. In particular, the high energy density in form of chemical elements and the usually high electric charge must be controlled, even in extreme situations in order to avoid hazards.
Accreditations for Battery Safety Testing:
•IEC 62133
•IEC 62281
•IEC 60086
•Mechanical Stress
•Electrical Stress
•Climatical Stress
•Artificial Aging
•EMC – Electromagnetic Compatibility of the Battery Management System (BMS)
•LVD – Electrical Safety for High Voltage devices in Battery Systems
•Immersion / Flooding
•Recording system to display the test results (Highspeed camera, Infrared video camera, Data recording)
When form factors and lighter weight of Li-Ion battery cells are required the reliability and safety of such battery packs play a major role. CTC advanced supports Assembler of battery packs in the development of safer battery systems, no matter which application area
•UN Transportation Tests
•IEC 62133:2012 (specifying the safety requirements for portable sealed secondary cells for use in portable applications)
•UL 1642, 2054
ECE regulations generally refer to a set of internationally agreed common technical regulations for motor vehicles as well as for parts and equipment of these. The ECE R100 provides uniform provisions concerning the approval of battery propelled vehicles and the electric powertrain. CTC advanced´s test center for high capacity battery systems is able to perform the various test cases acc. to ECE R 100 extensively.
CTC advanced is designated by the KBA (Kraftfahrt Bundesamt) as technical service provider for ECE R 100 and carries out testing in their highly equipped battery test center and supports its customers with the KBA approval handling.
It is essential to ensure that mobile communication devices do not have harmful effects on health due to radio-frequency electromagnetic fields. CTC advanced provides EMF – the measurement of electromagnetic fields, testing of HAC (Hearing Aid compatibility) as well as SAR, testing of the specific absorption rate.
Besides the contribution to safeguard radiation protection compliance, CTC advanced supports the Medical Industry with expert consulting, testing and certification solutions to ensure that your product meets the required quality, health, environmental and safety standards for a smooth market access.
HAC testing involves measuring the magnetic and electric field produced by a phone to ensure it does not interfere with the sound quality of a hearing aid. HAC testing was originally introduced in late 1970’s with the purpose of making it possible to couple a wired telephone with a hearing aid. Nowadays, these requirements have been extended to wireless devices.

HAC for mobile phones
•ANSI C63.19 (required by FCC for US market)
•M-Rating and T-Rating (to assist hearing aid users in finding wireless devices
which are compatible with their hearing aids)
•DASY5 test system •RF interference measurements according to ANSI C63.19, E-field emission and H-field emission.
•Audio frequency measurements according to ANSI C63.19, T-Coil signal amplitude, T-Coil frequency response and T-Coil signal to noise measurement.

HAC for telecommunication equipment
•FCC: CFR 47 FCC Part 68 (USA)
•ISED: IC CS-03 Part V (Canada)
•AS/ACIF S040 (Australia)
•ETS 300 381 (Europe)
•ETS/ES 200 381-1

Whether you are in banking, telecommunications, transportation, healthcare, security or other areas, Smart Card Technology is a fast-growing market which has become common place in our culture and daily lives.
As a leading and independent full service provider for SmartCard, RFID and NFC related solutions, CTC advanced’s SmartCard Technologies Competence Center offers a wide range of services to implement the type approval process for mobile payment applications, ICC cards, wearables and terminals.

ePAYMENT
Banking, Mobile Payment & mPOS Solutions
EMVCo
American Express
Discover
Mastercard
Visa
DK-Die Deutsche Kreditwirtschaft

eHEALTH
Electronic Health Cards
gematik
SESAM-Vitale

BIOMETRICS
eIDENTIFICATION
ePassport, nPA
BSI
ICAO
eTICKETING
VDV-KA
CEN/TS
GLOBAL PLATFORM
NFC FORUM

CTC advanced offers Type Approval Testing, Pretest / Debug Testing and Consultancy for the above mentioned smart technologies. CTC is a holder of various accreditations and is able to serve various test schemes. Last but not least CTC advanced is active member in standardization activities, such as the ETSI, NFC Forum, GlobalPlatform, NEXO, EMVGTA, GCF or GSMA.

CTC advanced is accredited for the testing of sound system equipment, voice performance and acoustic safety requirements, amongst others specializing in the testing of hearing aid electro-acoustic measurements. The state-of-the-art test lab including fully- and hemi-anechoic chamber, audiology room and audiology booth are equipped with professional measurement analyzers, microphones and audio sources. CTC advanced’s scope of acoustical measurements includes following testing services. Further tests can be carried out on demand, don’t hesitate to contact our acoustic experts with your special request.

Hearing Aid Electro-Acoustic and EMC Measurements
•IEC/EN 60118-0 ed. 3.0
•NSH 7th edition (Nordic Requirements)
•NSH 7.0 Annex A
•IEC 60118-0 ed. 2.0 + am1 ed. 2.0
•IEC 60118-1 ed. 3.1
•IEC 60118-2 ed. 2.0 + am1 ed. 2.0 + am2 ed. 2.0
•IEC 60118-6 ed. 2.0
•IEC 60118-7 ed. 2.0
•IEC 60118-13 ed. 4.0
•IEC 60118-13 ed. 3.0
•ANSI C63.19 clause 6
•AS/NZS 1088.9

Voice Quality
•PESQ, TOSQA and S-/N-/G-MOS tests
•Subjective analysis of speech using 3-QUEST
•EN 300175-8
•CAT-iq 2.0
•EG 202737
•EG 202738
•EG 202739
•EG 202740
•3GPP TS 26131/ 3GPP TS 26132 (ETSI TS 126131/ ETSI TS 126132)
•GSMA HD Voice
•TBR 10
•TIA/EIA-810-B
•TIA-920
•AS/CA S004

Acoustic Safety Requirements
•EG 202518
•UL 60950 -1 Annex NAD
•IEC/EN 62368-1 clause 10.6
•IEC/EN 60950-1 Am. 12 clause Z.x
•EN 50332-1
•EN 50332-2

Sound Power Measurements
•ISO 3744
•ISO 3745

CERTIFICATION
Anyone who wishes to launch products successfully into local or international markets needs the correct authorizations. In many cases compliance conditions for particular markets differ from country to country.
CTC advanced can help you to manage the conformity processes all around the world – whether it is the United States, the European Union, Asia Pacific or elsewhere. With our extensive global accreditations, recognitions and worldwide contacts with decisive authorities, we are familiar with the standards, directives and access requirements in any market you target.

Specification of Services

Test areas

Testing > Medical > Appliances Testing > Electronics > EMC Testing > Electronics > Elect. Components Testing > Electronics > Audio Testing > Industry components > Measuring Systems Testing > Industry components > Trains/Planes/Ships Certification > Automotive Certification > Electronics Testing > Medical > Instruments Testing > Industry components > Automotive

Certifications / authorizations / supported regulations

Kraftfahrtbundesamt; KBA

Testing Standards

Accreditations for Testing Standards

ACCRED. BODY

ACCRED. STANDARD

DAkkS DIN EN ISO/IEC 17025

Supported Testing Standards

Testing Standard

Description

A 250
ANALOG 1.1
ANSI/AAMI ES 60601-1
ANSI C 63.10-2013
ANSI C 63.17-2013
ANSI C 63.19-2007
ANSI C 63.19-2011
ANSI C 63.4-2003
ANSI C 63.4-2009
ANSI C 63.4-2014
ANSI/TIA 603
AS/ACIF S040
AS/CA S004
AS/NZS 3112
AS/NZS 4268
AS/NZS 60065
AS/NZS 60950.1
AS/NZS 61000.6.3
AS/NZS 61000.6.4
AS/NZS CISPR 11
AS/NZS CISPR 12
AS/NZS CISPR 13
AS/NZS CISPR 14.1
AS/NZS CISPR 15
AS/NZS CISPR 22
BS 1363-1
BS 1363-2
BS 1363-3
BSI TR 03105
CAN/CSA C22.2
CFR 47
CS 03
DIN 40
DIN EN 12895
Industrial trucks - Electromagnetic compatibility; German version EN 12895:2015
DIN EN 13241-1
DIN EN 13309
Construction machinery - Electromagnetic compatibility of machines with internal power supply; German version EN 13309:2010
DIN EN 300
Oriented Strand Boards (OSB) - Definitions, classification and specifications; German version EN 300:2006
DIN EN 301
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2013
DIN EN 50065-1
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances; German version EN 50065-1:2011
DIN EN 50121-3-2
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus; German version EN 50121-3-2:2015
DIN EN 50121-4
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus; German version EN 50121-4:2015
DIN EN 50130-4
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems; German version EN 50130-4:2011 + A1:2014
DIN EN 50293
Road traffic signal systems - Electromagnetic compatibility; German version EN 50293:2012
DIN EN 50332-1
Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"; German version EN 50332-1:2013
DIN EN 50332-2
Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design; German version EN 50332-2:2013
DIN EN 50360
Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz); German version EN 50360:2001 + Cor. :2006 + A1:2012
DIN EN 50364
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications; German version EN 50364:2010
DIN EN 50383
Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz); German version EN 50383:2010
DIN EN 50385
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz) - General public; German version EN 50385:2002
DIN EN 50412-2-1
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements; German version EN 50412-2-1:2005
DIN EN 50413
Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz); German version EN 50413:2008
DIN EN 50498
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles; German version EN 50498:2010
DIN EN 50561-1
Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use; German version EN 50561-1:2013
DIN EN 50566
Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz); German version EN 50566:2013
DIN EN 55011
Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement - Amendment 1 - Measurement of radiated disturbances - Introduction of the FAR for use with CISPR 11 and determination of limits (CIS/B/627/CDV:2015); German version EN 55011:2015/FprA1:2015
DIN EN 55012
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (IEC/CISPR 12:2007 + A1:2009); German version EN 55012:2007 + A1:2009
DIN EN 55013
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13:2009, modified + AMD1:2015, modified); German version EN 55013:2013 + A1:2016
DIN EN 55014-1
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2005 + A1:2008 + Cor. :2009 + A2:2011); German version EN 55014-1:2006 + A1:2009 + A2:2011
DIN EN 55014-2
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (CISPR 14-2:2015); German version EN 55014-2:2015
DIN EN 55015
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Supplement 1: Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps (CISPR/TR 30-1:2012)
DIN EN 55020
Explanatory sheet 1 to DIN EN 55020 (VDE 0872 Teil 20):2003-02 - Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement; Application guide to DIN EN 55020 (VDE 0872 Part 20):2000-01
DIN EN 55022
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 22:2008, modified); German version EN 55022:2010
DIN EN 55024
Information technology equipment - Immunity characteristics - Limits and methods of measurement (CISPR 24:2010 + Cor.:2011 + A1:2015); German version EN 55024:2010 + A1:2015
DIN EN 55025
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers (IEC/CISPR 25:2008); German version EN 55025:2008
DIN EN 55032
Electromagnetic compatibility of multimedia equipment - Emission Requirements (CISPR 32:2015); German version EN 55032:2015
DIN EN 55103-1
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions; German version EN 55103-1:2009 + A1:2012
DIN EN 55103-2
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity; German version EN 55103-2:2009
DIN EN 60065
Audio, video and similiar electronic apparatus - Safety requirements (IEC 60065:2014, modified); German version EN 60065:2014, Corrigendum to DIN EN 60065 (VDE 0860):2015-11, (IEC 60065:2014/COR1:2015); German version EN 60065:2014/AC:2016
DIN EN 60068-2-27
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock (IEC 60068-2-27:2008); German version EN 60068-2-27:2009
DIN EN 60068-2-47
Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005); German version EN 60068-2-47:2005
DIN EN 60068-2-48
Environmental testing - Part 2: Tests; guidance on the application of the tests of IEC 60068 to simulate the effects of storage (IEC 60068-2-48:1982); German version EN 60068-2-48:1999
DIN EN 60068-2-6
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007); German version EN 60068-2-6:2008
DIN EN 60068-2-64
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance (IEC 60068-2-64:2008); German version EN 60068-2-64:2008
DIN EN 60068-2-78
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC 60068-2-78:2012); German version EN 60068-2-78:2013
DIN EN 60086-4
Primary batteries - Part 4: Safety of lithium batteries (IEC 60086-4:2014); German version EN 60086-4:2015
DIN EN 60086-5
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (IEC 60086-5:2011); German version EN 60086-5:2011
DIN EN 60118
DIN EN 60118-0
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids (IEC 60118-0:2015); German version EN 60118-0:2015
DIN EN 60118-1
DIN EN 60118-13
Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:2011); German version EN 60118-13:2011
DIN EN 60118-2
DIN EN 60118-6
DIN EN 60118-7
Electroacoustics - Hearing aids - Part 7: Measurement of performance characteristics of hearing aids for production, supply and delivery quality assurance purposes (IEC 60118-7:2005); German version EN 60118-7:2005
DIN EN 60215
Safety requirements for radio transmitting equipment (IEC 60215:1987 + A1:1990); German version EN 60215:1989 + A1:1992
DIN EN 60335-1
Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2010, modified); German version EN 60335-1:2012
DIN EN 60335-2-29
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers (IEC 60335-2-29:2002 + A1:2004 + A2:2009); German version EN 60335-2-29:2004 + A2:2010
DIN EN 60601-1
Graphical symbols for electrical equipment in medical practice (IEC/TR 60878:2003, modified), Text in German and English
DIN EN 60601-1-11
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment (IEC 60601-1-11:2015); German version EN 60601-1-11:2015
DIN EN 60601-1-2
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests (IEC 60601-1-2:2014); German version EN 60601-1-2:2015
DIN EN 60601-1-8
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems (IEC 60601-1-8:2006 + A1:2012); German version EN 60601-1-8:2007 + Cor.:2010 + A1:2013
DIN EN 60601-2-66
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems (IEC 60601-2-66:2012); German version EN 60601-2-66:2013
DIN EN 60669-1
Switches for household and similar fixed-electrical installations - Part 1: General requirements (IEC 60669-1:1998, modified + A1:1999, modified + A2:2006, modified); German version EN 60669-1:1999 + A1:2002 + Corrigendum:2007 + A2:2008
DIN EN 60669-2
DIN EN 60669-2-1
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches (IEC 60669-2-1:2002, modified + A1:2008, modified); German version EN 60669-2-1:2004 + A1:2009
DIN EN 60669-2-2
Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) (IEC 60669-2-2:2006); German version EN 60669-2-2:2006
DIN EN 60669-2-3
Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS) (IEC 60669-2-3:2006); German version EN 60669-2-3:2006
DIN EN 60695-11-10
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-11-10:2013); German version EN 60695-11-10:2013
DIN EN 60695-11-20
Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods (IEC 60695-11-20:2015 + COR1:2016); German version EN 60695-11-20:2015 + AC:2016
DIN EN 60695-11-5
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2004); German version EN 60695-11-5:2005
DIN EN 60695-2-10
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure (IEC 60695-2-10:2013); German version EN 60695-2-10:2013
DIN EN 60695-2-11
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014); German version EN 60695-2-11:2014
DIN EN 60695-2-12
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials (IEC 60695-2-12:2010 + A1:2014); German version EN 60695-2-12:2010 + A1:2014
DIN EN 60730-1
Automatic electrical controls for household and similar use - Part 1: General requirements (IEC 60730-1:2010, modified); German version EN 60730-1:2011
DIN EN 60730-2-10
Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays (IEC 60730-2-10:2006); German version EN 60730-2-10:2007
DIN EN 60730-2-11
Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators (IEC 60730-2-11:2006); German version EN 60730-2-11:2008
DIN EN 60730-2-12
Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005, modified); German version EN 60730-2-12:2006
DIN EN 60730-2-13
Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2006, modified); German version EN 60730-2-13:2008
DIN EN 60730-2-14
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators (IEC 60730-2-14:1995, modified + A1:2001 + A2:2007, modified); German version EN 60730-2-14:1997 + A1:2001 + A11:2005 + A2:2008
DIN EN 60730-2-15
Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls (IEC 60730-2-15:2008, modified); German version EN 60730-2-15:2010
DIN EN 60730-2-19
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified + A2:2007); German version EN 60730-2-19:2002 + A11:2005 + A2:2008
DIN EN 60730-2-2
Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors (IEC 60730-2-2:2001, modifiziert + A1:2005, modified); German version EN 60730-2-2:2002 + A1:2006 + A11:2005
DIN EN 60730-2-3
Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps (IEC 60730-2-3:2006, modified); German version EN 60730-2-3:2007
DIN EN 60730-2-4
Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:2006, modified); German version EN 60730-2-4:2007
DIN EN 60730-2-6
Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 60730-2-6:2007, modified); German version EN 60730-2-6:2008
DIN EN 60730-2-7
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches (IEC 60730-2-7:2008, modified); German version EN 60730-2-7:2010
DIN EN 60730-2-8
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified + A1:2002, modified); German version EN 60730-2-8:2002 + A1:2003
DIN EN 60730-2-9
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2008, modified); German version EN 60730-2-9:2010
DIN EN 60825-1
National wordings of laser warning labels; German version CLC/TR 50493:2007
DIN EN 60825-2
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) - Supplement 1: Interpretation Sheet 1
DIN EN 60945
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002); German version EN 60945:2002
DIN EN 60950-1
Safety aspects for xDSL signals on circuits connected to telecommunication networks - (DSL: Digital Subscriber Line) - (IEC/TS 62367:2004); German version CLC/TS 62367:2005
DIN EN 60950-21
Information technology equipment - Safety - Part 21: Remote power feeding (IEC 60950-21:2002); German version EN 60950-21:2003
DIN EN 60950-22
Information technology equipment - Safety - Part 22: Equipment installed outdoors (IEC 60950-22:2005, modified); German version EN 60950-22:2006
DIN EN 60974
DIN EN 61000-3-2
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) (IEC 61000-3-2:2014); German version EN 61000-3-2:2014
DIN EN 61000-3-3
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection (IEC 61000-3-3:2013); German version EN 61000-3-3:2013
DIN EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004); German version EN 61000-4-11:2004
DIN EN 61000-4-2
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2:2008); German version EN 61000-4-2:2009
DIN EN 61000-4-3
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006 + A1:2007 + A2:2010); German version EN 61000-4-3:2006 + A1:2008 + A2:2010
DIN EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4:Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2012); German version EN 61000-4-4:2012
DIN EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (IEC 61000-4-5:2014); German version EN 61000-4-5:2014
DIN EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6:2013); German version EN 61000-4-6:2014
DIN EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8:2009); German version EN 61000-4-8:2010
DIN EN 61000-4-9
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test (IEC 61000-4-9:1993 + A1:2000); German version EN 61000-4-9:1993 + A1:2001
DIN EN 61000-6-1
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:2005); German version EN 61000-6-1:2007
DIN EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments (IEC 61000-6-2:2005); German version EN 61000-6-2:2005
DIN EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:2006 + A1:2010); German version EN 61000-6-3:2007 + A1:2011
DIN EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments (IEC 61000-6-4:2006 + A1:2010); German version EN 61000-6-4:2007 + A1:2011
DIN EN 61010-031
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2015); German version EN 61010-031:2015
DIN EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements (IEC 61010-1:2010 + Cor. :2011); German version EN 61010-1:2010
DIN EN 61010-2
DIN EN 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014); German version EN 61010-2-010:2014
DIN EN 61010-2-020
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006); German version EN 61010-2-020:2006
DIN EN 61010-2-030
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits (IEC 61010-2-030:2010 + Cor.:2011); German version EN 61010-2-030:2010
DIN EN 61010-2-032
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2012); German version EN 61010-2-032:2012
DIN EN 61010-2-040
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040:2015); German version EN 61010-2-040:2015
DIN EN 61010-2-051
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2015); German version EN 61010-2-051:2015
DIN EN 61010-2-061
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:2015); German version EN 61010-2-061:2015
DIN EN 61010-2-081
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2015); German version EN 61010-2-081:2015
DIN EN 61010-2-101
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified); German version EN 61010-2-101:2002
DIN EN 61010-2-201
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2013); German version EN 61010-2-201:2013 + AC:2013
DIN EN 61058-1
Switches for appliances - Part 1: General requirements (IEC 61058-1:2000, modified + A1:2001 + A2:2007); German version EN 61058-1:2002 + A2:2008
DIN EN 61204-3
Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000
DIN EN 61326-1
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2012); German version EN 61326-1:2013
DIN EN 61326-2-6
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC 61326-2-6:2012); German version EN 61326-2-6:2013
DIN EN 61547
Equipment for general lighting purposes - EMC immunity requirements (IEC 61547:2009); German version EN 61547:2009
DIN EN 61558-1
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (IEC 61558-1:2005); German version EN 61558-1:2005
DIN EN 61558-2-1
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications (IEC 61558-2-1:2007); German version EN 61558-2-1:2007
DIN EN 61558-2-13
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers (IEC 61558-2-13:2009); German version EN 61558-2-13:2009
DIN EN 61558-2-14
Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers (IEC 61558-2-14:2012); German version EN 61558-2-14:2013
DIN EN 61558-2-15
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations (IEC 61558-2-15:2011); German version EN 61558-2-15:2012
DIN EN 61558-2-16
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (IEC 61558-2-16:2009 + A1:2013); German version EN 61558-2-16:2009 + A1:2013
DIN EN 61558-2-19
Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers (IEC 61558-2-19:2000); German version EN 61558-2-19:2001
DIN EN 61558-2-2
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007); German version EN 61558-2-2:2007
DIN EN 61558-2-20
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors (IEC 61558-2-20:2010); German version EN 61558-2-20:2011
DIN EN 61558-2-23
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites (IEC 61558-2-23:2010); German version EN 61558-2-23:2010
DIN EN 61558-2-3
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners (IEC 61558-2-3:2010); German version EN 61558-2-3:2010
DIN EN 61558-2-4
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers (IEC 61558-2-4:2009); German version EN 61558-2-4:2009
DIN EN 61558-2-5
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units (IEC 61558-2-5:2010); German version EN 61558-2-5:2010
DIN EN 61558-2-6
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers (IEC 61558-2-6:2009); German version EN 61558-2-6:2009
DIN EN 61558-2-7
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys (IEC 61558-2-7:2007, modified); German version EN 61558-2-7:2007
DIN EN 61558-2-8
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes (IEC 61558-2-8:2010); German version EN 61558-2-8:2010
DIN EN 61558-2-9
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2010); German version EN 61558-2-9:2011
DIN EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods (IEC 61800-3:2004 + A1:2011); German version EN 61800-3:2004 + A1:2012
DIN EN 62133
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2012); German version EN 62133:2013
DIN EN 62281
Safety of primary and secondary lithium cells and batteries during transport (IEC 62281:2012); German version EN 62281:2013
DIN EN 62368-1
Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified + Cor.:2015); German version EN 62368-1:2014 + AC:2015
DIN EN 62369-1
Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems (IEC 62369-1:2008); German version EN 62369-1:2009
DIN EN ISO 14982
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998); German version EN ISO 14982:2009
DIN EN ISO 60
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999
DIN EN ISO 60068-2-1
DIN EN ISO 60068-2-14
DIN EN ISO 60068-2-2
Selbsttätige Gleiswaagen (SGW) - Metrologische und technische Anforderungen, Prüfung (OIML R 106-1:1997)
DIN EN ISO 60068-2-30
DIN EN ISO 60068-2-38
DIN EN ISO 62
Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
DIN EN ISO/IEC 170254
DIN ISO 10605
Keine
DIN ISO 11452-2
Keine
DIN ISO 11452-4
Keine
DIN ISO 11452-5
DIN ISO 7637-3
Straßenfahrzeuge;Elektrische Störungen durch Leitung und Kopplung;Teil 3: Fahrzeuge mit 12-V- oder 24-V-Bordnetz-Nennspannung;Übertragung von impulsförmigen elektrischen Störgrößen durch kapazitive und;induktive Kopplung auf Leitungen, die keine Versorgungsleitungen sind;(ISO 7637-3:1995);;

DTAAB DT.04
ED 62
E EN 60335-2-29
E EN 60335-2-97
E EN 61058-1
EMR 2003
EN 50075
Flat non-wirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
EN 60936-1
EN 61058-2-4
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches (IEC 61058-2-4:1995 + A1:2003)
EN 61097
ETSI EG 202
ETSI EN 300
ETSI EN 301
ETSI EN 301489-33
ETSI EN 302
ETSI EN 303
ETSI ETS 300
ETSI TS 101
ETSI TS 134
FCC MP 5
FA3 = Flexible Akkreditierung Stufe 3
GSM 1800
GSM 900
HS/4.0/4.1/4.2
IEC 60
IEC 60065
2014-06
IEC 60068
IEC 60068-2-1
IEC 60068-2-14
IEC 60068-2-2
IEC 60068-2-27
IEC 60068-2-30
IEC 60068-2-38
IEC 60068-2-47
IEC 60068-2-48
IEC 60068-2-6
Festfrequenz
IEC 60068-2-64
IEC 60068-2-78
IEC 60086-4
2007-09
IEC 60086-5
2011-03
IEC 60118
IEC 60118-0
IEC 60118-13
IEC 60118-6
IEC 60118-7
IEC 60215
IEC 60335-1
2010
IEC 60335-2-29
IEC 60601-1
IEC 60601-1-11
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
IEC 60601-1-2
Vom Hersteller vor-gelegte Informationen
IEC 60601-1-8
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
IEC 60601-2-66
IEC 60669-1
1998-02
IEC 60669-2-1
Keine
IEC 60669-2-2
Keine
IEC 60669-2-3
IEC 60695-11-10
Fire hazard testing - Part 11-10: Test flames; 50 W horizontal and vertical flame test methods
IEC 60695-11-5
DIN EN-60068-2-1
IEC 60695-2-11
IEC 60695-2-12
2010-10
IEC 60730-1
Keine
IEC 60730-2-10
2006-10
IEC 60730-2-11
2006-10
IEC 60730-2-12
2005-08
IEC 60730-2-13
IEC 60730-2-14
1995-11
IEC 60730-2-15
2008-01
IEC 60730-2-19
IEC 60730-2-2
IEC 60730-2-3
Automatische elektrische Regel-und Steuergeräte für den
IEC 60730-2-4
Automatische elektrische Regel-und Steuergeräte für den
IEC 60730-2-6
Automatische elektrische Regel-und Steuergeräte für den
IEC 60730-2-7
Keine
IEC 60730-2-8
Automatische elektrische Regel-und Steuergeräte für den
IEC 60730-2-9
2008-06
IEC 60825-1
Test of system used for lighting technologies
IEC 60825-2
IEC 60945
Keine
IEC 60950-1
IEC 60950-21
IEC 60950-22
IEC 60974
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-4-11
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-9
IEC 61000-6-1
IEC 61000-6-2
IEC 61000-6-3
Keine
IEC 61000-6-4
Keine ge-strahlte Stör-aussendung in 10 m / 30 m Messent-fernung
IEC 61010-031
IEC 61010-1
IEC 61010-2-010
IEC 61010-2-020
IEC 61010-2-030
IEC 61010-2-032
IEC 61010-2-040
Beatmungs-, Sauerstofftherapie- (einschl. hyperbare Therapiekammern) und Inhalations-narkosegeräte
IEC 61010-2-051
IEC 61010-2-061
IEC 61010-2-081
keine Einschränkungen
IEC 61010-2-101
IEC 61010-2-201
Sicherheitsbestimmungen für elektrische Mess-, Steuer-und
IEC 61058-1
2000-07
IEC 61058-2-4
IEC 61097-5
IEC 61204-3
IEC 61326-1
keine gestrahlte Störaussendung in 10 m / 30 m Messent-fernung
IEC 61326-2-6
IEC 61547
IEC 61558-1
2005-09
IEC 61558-2-1
2007
IEC 61558-2-13
enthalten
IEC 61558-2-14
IEC 61558-2-15
2011
IEC 61558-2-16
2009
IEC 61558-2-19
2000
IEC 61558-2-2
enthalten
IEC 61558-2-20
2010
IEC 61558-2-23
2010
IEC 61558-2-3
2010
IEC 61558-2-4
enthalten
IEC 61558-2-5
2010
IEC 61558-2-6
Sicherheitstransformatoren enthalten
IEC 61558-2-7
2007
IEC 61558-2-8
2010
IEC 61558-2-9
IEC 61800-3
Keine
IEC 62
IEC 62133
IEC 62209
IEC 62209-1
IEC 62281
IEC 62368-1
Einrichtungen für Audio/Video, Informations-und
IEC 62388
IEC/CISPR 11
Keine
IEC/CISPR 12
IEC/CISPR 13
IEC/CISPR 14-1
IEC/CISPR 14-2
Keine
IEC/CISPR 15
Keine
IEC/CISPR 20
Messung der Eingangsstörfestigkeit nach Abschnitt 5.3 nicht durchführbar, Messung der Störfestigkeit gegenüber angelegten (asymmetrischen) HF Spannungen nach Abschnitt 5.4 nicht durchführbar; Messung der Schirmdämpfung nach Abschnitt 5.5 nicht durchführbar; bei Messung der schnellen elektrischen Transienten nach Abschnitt 5.6 nur Prüfung bei verwandten Geräten der Unterhaltungselektronik nach Grundnorm EN 61000-4-4 (Burst-
IEC/CISPR 22
Keine
IEC/CISPR 24
Keine
IEC/CISPR 25
Keine
IEEE 1528
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE 1528-2011
IEEE 1528-2013
IEEE 1625
Rechargeable batteries for multi-cell mobile computing devices
IEEE 1725
Rechargeable batteries for cellular telephones
IEEE C63.19
IEEE C95.1-1992
IEEE C95.1-1999
IEEE C95.1-2005
IEEE C95.3-2002
IMT 2000
ISO 10373-6
ISO 11452-8
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
ISO 11452-9
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
ISO 13766
Earth-moving machinery - Electromagnetic compatibility
ISO 16750-2
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 7637-1
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
ISO 7637-2
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
JIS T 0601-1
KDB 285076
KDB 447498
KDB 865664
KS C IEC 60601-1
LLCP 1.2
MPT 1349
NF C61-314
NSH 7.0
PR 27
PTS 6.4.0
RF PHY.TS/4.0/4.1/4.2
RSS 102
RSS 111
RSS 127
RSS 130
RSS 142
RSS 170
RSS 191
RSS 192
RSS 197
RSS 199
RSS 211
RSS 216
RSS 238
RSS 244
RSS 247
RSS 251
RSS 287
SEV 1011
SEV 1011/A1
SN EN 60601-1
SNEP 1.0
ST SG AC 10-11
TBR 10
TBR 22
TBR 38
TIA 102
TS 25.101
TS 25.144
TS 26.131
TS 26.132
TS 34.114
TS 34.121
TS 51.010-1
UL 1642
UL 2054
UL 60065
UL 60950-1
UL 62368-1
UN ECE R 10
UN ECE R 100
UN ST SG AC 10-11
VDE 0620-1
VDE 0620-101
VDE 0620-2-1
VDE 0805
VDE 0805-1
2011-01
VDE 0805-21
VDE 0805-22
VDE 0808-121
VDE 0843-20-2-6
VDE 0848-1
VDE 0860
2011-10
VDE 0866
VDE 0868-1

CTC advanced GmbH is currently available.

Request this lab for your testing project now. After submitting your request, you will be able to add more labs anytime:

Lab location:

66117, Saarbrücken, Germany

A top lab from our database

Excellent in the fields: