Testing laboratory in Dresden, Germany
Verified
Unser Prüflabor in Detmold kann auf eine über zwanzigjährige Erfahrung als Nordwestdeutsches Möbel- und Materialprüfinstitut (NIMM) am Felix-Fechenbach-Berufskolleg (FFB) zurückblicken. Seit Sommer 2008 ist das Labor als NIMM-EPH Detmold eine Zweigstelle des EPH mit Hauptsitz in Dresden. Schwerpunkt unserer Serviceleistungen in Detmold sind mechanisch-physikalische Prüfungen an Möbeln und Zuliefermaterialien für die Möbelwirtschaft, aber auch an Holz, Holzwerkstoffen, Klebstoffen und Kompositen für Anwendungen im Bauwesen und anderen Zweigen der Industrie und des Handwerks. Unser Labor in Detmold ist durch die DAkkS nach DIN EN ISO/IEC 17025 für eine Vielzahl von Normen der Möbel-, Material- und Oberflächenprüfung akkreditiert und durch die ZLS als befugte Stelle für die Durchführung von GS- Baumusterprüfungen anerkannt. Durch die enge Zusammenarbeit mit dem Prüflabor in Dresden stehen unseren Kunden darüber hinaus das gesamte EPH-Spektrum an Prüf-, Überwachungs- und Zertifizierungsleistungen zur Verfügung. Diese neutrale Position als unabhängiger Dritter setzt unser Prüflabor auch in die Lage als anerkannter Partner für Produktentwickler, für RAL-Gütegemeinschaften (z. B. die Deutsche Gütegemeinschaft Möbel (DGM) oder Handelshäuser (Tchibo)) wirksam zu werden. Von Detmold aus führen wir Fertigungsstättenbesuche durch; ein Voraussetzung für die Vergabe des GS-Zeichens durch unsere GS-Zertifizierungsstelle in Dresden, aber auch Überwachungsbesuche bei Holzwerkstoffherstellern im Rahmen der CARB/IKEA-Zertifizierung. Seit 2009 führen wir in unserem Prüflabor eine fakultative Ausbildung Möbel- und Materialprüfung für interessierte Schüler der Fachschule für Holztechnik, ergänzend zum Ausbildungsprogramm am FFB, durch. Zu unserem Serviceangebot gehören aber auch TSM-Lehrgänge Sicheres Arbeiten mit Holzbearbeitungsmaschinen.
Test areas
Accreditations for Testing Standards |
|
---|---|
ACCRED. BODY |
ACCRED. STANDARD |
DAkkS | DIN EN ISO/IEC 17025 |
Supported Testing Standards |
|
Testing Standard |
Description |
DIN 13013 |
Latex foam hospital mattresses; dimensions, requirements, testing
|
DIN 13014 |
Polyether foam hospital mattresses; dimensions, requirements, testing
|
DIN 18095-2 |
Smoke control doors; type testing for durability and leakage
|
DIN 18101 |
Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions
|
DIN 18104-1 |
Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
|
DIN 18104-2 |
Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
|
DIN 18106 |
Einbruchhemmende Gitter;Anforderungen und Prüfverfahren;;
Einbruchhemmende Gitter;Anforderungen und Prüfverfahren;; |
DIN 4102-1 |
Fire behaviour of building materials and building components - Part 1: Building materials; concepts, requirements and tests
|
DIN 4102-18 |
Fire behaviour of building materials and components; fire barriers, verification of automatic closure (continuous performance test)
|
DIN 50016 |
|
DIN 50100 |
Load controlled fatigue testing - Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components
|
DIN 51097 |
Testing of floor coverings; determination of the anti-slip properties; wet-loaded barefoot areas; walking method; ramp test
|
DIN 51130 |
Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test
|
DIN 51131 |
Testing of floor coverings - Determination of the anti-slip property - Method for measurement of the sliding friction coefficient
|
DIN 52161-1 |
Testing of wood preservatives - Detection of wood preservatives in wood - Sampling from structural timber in service
|
DIN 52182 |
Testing of wood; determination of density
|
DIN 52188 |
Testing of wood; determination of ultimate tensile stress parallel to grain
|
DIN 52189-1 |
Testing of wood; Impact bending test; Determination of impact bending strength
|
DIN 52192 |
Testing of wood; compression test perpendicular to grain
|
DIN 52367 |
Particleboards - Determination of shear strength parallel to the surface
|
DIN 52376 |
Testing of plywood - Determination of compression strength parallel to the surfaces
|
DIN 52377 |
Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
|
DIN 52612-1 |
Wärmeschutztechnische Prüfungen -Bestimmung der
|
DIN 52612-2 |
Wärmeschutztechnische Prüfungen -Bestimmung der
|
DIN 52612-3 |
Wärmeschutztechnische Prüfungen -Bestimmung der
|
DIN 52619-3 |
Wärmeschutztechnische Prüfungen -Bestimmung des
|
DIN 53122-1 |
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
|
DIN 53160-1 |
Determination of the colourfastness of articles for common use - Part 1: Test with artificial saliva
|
DIN 53160-2 |
Determination of the colourfastness of articles for common use - Part 2: Test with artificial sweat
|
DIN 53236 |
Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
|
DIN 53255 |
Testing of wood adhesives and glued wood joints; shear and delamination tests for determining the failing strength of plywood bonds (plywood and coreboard)
|
DIN 53293 |
Testing of sandwiches; Bending test
|
DIN 53463 |
Testing of Laminates; Splitting Test on Laminated Sheets
|
DIN 53579 |
Testing of flexible cellular materials - Indentation test on finished parts
|
DIN 67530 |
Reflektometer als Hilfsmittel zur Glanzbeurteilung an ebenen
|
DIN 68140-1 |
Keilzinkenverbindungen von Holz;Teil 1: Keilzinkenverbindungen von Nadelholz;für tragende Bauteile;;
Keilzinkenverbindungen von Holz;Feil 1: Keilzinkenverbindungen von Nadelholz;für tragende Bauteile;; |
DIN 68141 |
Wood adhesives - Determination of the open drying time and evaluation of wetting and brushability
|
DIN 68861-1 |
Furniture surfaces - Part 1: Behaviour at chemical influence
|
DIN 68861-2 |
Furniture surfaces - Part 2: Behavior at abrasion
|
DIN 68861-4 |
Furniture surfaces - Part 4: Behaviour at scratches
|
DIN 68861-6 |
Möbeloberflächen; Verhalten bei Zigarettenglut
|
DIN 68861-7 |
Furniture surfaces - Part 7: Behaviour subjection to dry heat
|
DIN 68861-8 |
Furniture surfaces - Part 8: Behaviour on subjection to wet heat
|
DIN 68877 |
Arbeitsdrehstuhl -Sicherheitstechnische Anforderungen, Prüfung
|
DIN 68930 |
Kitchen furniture - Fitness for purpose - Requirements and testing
|
DIN CEN/TS 15397 |
Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
|
DIN EN 1021-1 |
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette; German version EN 1021-1:2014
|
DIN EN 1021-2 |
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent; German version EN 1021-2:2014
|
DIN EN 1026 |
Windows and doors - Air permeability - Test method; German version EN 1026:2016
|
DIN EN 1027 |
Windows and doors - Water tightness - Test method; German version EN 1027:2016
|
DIN EN 107 |
Methods of testing windows; mechanical tests
|
DIN EN 1072 |
Sperrholz -Beschreibung der Biegeeigenschaften von Bau-Sperrholz
|
DIN EN 1081 |
Resilient floor coverings - Determination of the electrical resistance; German version EN 1081:1998
|
DIN EN 1087-1 |
Particleboards - Determination of moisture resistance - Part 1: Boil test; German version EN 1087-1:1995
|
DIN EN 1121 |
Doors - Behaviour between two different climates - Test method; German version EN 1121:2000
|
DIN EN 1125 |
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods; German version EN 1125:2008
|
DIN EN 1128 |
Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995
|
DIN EN 113 |
Wood preservatives - Method of test for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values; German version EN 113:1996
|
DIN EN 1176-1 |
Playground equipment and surfacing - Part 1: General safety requirements and test methods; German version EN 1176-1:2008
|
DIN EN 1176-2 |
Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings; German version EN 1176-2:2008
|
DIN EN 1176-3 |
Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides; German version EN 1176-3:2008
|
DIN EN 1176-4 |
Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways; German version EN 1176-4:2008
|
DIN EN 1176-5 |
Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels; German version EN 1176-5:2008
|
DIN EN 1176-6 |
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment; German version EN 1176-6:2008
|
DIN EN 1176-7 |
Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation; German version EN 1176-7:2008
|
DIN EN 1191 |
Windows and doors - Resistance to repeated opening and closing - Test method; German version EN 1191:2012
|
DIN EN 1192 |
Doors - Classification of strength requirements; German version EN 1192:1999
|
DIN EN 1194 |
Holzbauwerke;Brettschichtholz;Festigkeitsklassen und Bestimmung charakteristischer Werte;Deutsche Fassung EN 1194 : 1999;;
|
DIN EN 1195 |
Timber structures - Test methods - Performance of structural floor decking; German version EN 1195:1997
|
DIN EN 120 |
Holzwerkstoffe, Bestimmung des Formaldehydgehaltes, Extraktionsverfahren
|
DIN EN 12046-2 |
Operating forces - Test method - Part 2: Doors; German version EN 12046-2:2000
|
DIN EN 12086 |
Thermal insulating products for building applications - Determination of water vapour transmission properties; German version EN 12086:2013
|
DIN EN 12087 |
Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:2013
|
DIN EN 12089 |
Thermal insulating products for building applications - Determination of bending behaviour; German version EN 12089:2013
|
DIN EN 12091 |
Thermal insulating products for building applications - Determination of freeze-thaw resistance; German version EN 12091:2013
|
DIN EN 12105 |
Resilient floor coverings - Determination of moisture content of agglomerated composition cork; German version EN 12105:1998
|
DIN EN 12207 |
Windows and doors - Air permeability - Classification; German version EN 12207:2016
|
DIN EN 12208 |
Windows and doors - Watertightness - Classification; German version EN 12208:1999
|
DIN EN 12210 |
Windows and doors - Resistance to wind load - Classification; German version EN 12210:2016
|
DIN EN 12211 |
Windows and doors - Resistance to wind load - Test method; German version EN 12211:2016
|
DIN EN 12217 |
Doors - Operating forces - Requirements and classification; German version EN 12217:2015
|
DIN EN 12219 |
Doors - Climatic influences - Requirements and classification; German version EN 12219:1999
|
DIN EN 12400 |
Windows and pedestrian doors - Mechanical durability - Requirements and classification; German version EN 12400:2002
|
DIN EN 12412-2 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames; German version EN 12412-2:2003
|
DIN EN 12430 |
Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:2013
|
DIN EN 12431 |
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:2013
|
DIN EN 12520 |
Furniture - Strength, durability and safety - Requirements for domestic seating; German version EN 12520:2015
|
DIN EN 12521 |
Furniture - Strength, durability and safety - Requirements for domestic tables; German version EN 12521:2015
|
DIN EN 12527 |
Castors and wheels - Test methods and apparatus; German version EN 12527:1998
|
DIN EN 12663-1 |
Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons); German version EN 12663-1:2010+A1:2014
|
DIN EN 12664 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; German version EN 12664:2001
|
DIN EN 12667 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001
|
DIN EN 12720 |
Furniture - Assessment of surface resistance to cold liquids; German version EN 12720:2009+A1:2013
|
DIN EN 12721 |
Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013
|
DIN EN 12722 |
Furniture - Assessment of surface resistance to dry heat; German version EN 12722:2009+A1:2013
|
DIN EN 12727 |
Furniture - Ranked seating - Requirements for safety, strength and durability; German version EN 12727:2016
|
DIN EN 12939 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000
|
DIN EN 1294 |
Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; German version EN 1294:2000
|
DIN EN 13049 |
Windows - Soft and heavy body impact - Test method, safety requirements and classification; German version EN 13049:2003
|
DIN EN 13115 |
Windows - Classification of mechanical properties - Racking, torsion and operating forces; German version EN 13115:2001
|
DIN EN 13150 |
Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
|
DIN EN 13183-1 |
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method; German version EN 13183-1:2002
|
DIN EN 13300 |
Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification; German version EN 13300:2001 + AC:2002
|
DIN EN 1339 |
Concrete paving flags - Requirements and test methods; German version EN 1339:2003
|
DIN EN 13659 |
Shutters and external venetian blinds - Performance requirements including safety; German version EN 13659:2015
|
DIN EN 13721 |
Furniture - Assessment of the surface reflectance; German version EN 13721:2004
|
DIN EN 13722 |
Furniture - Assessment of the surface gloss; German version EN 13722:2004
|
DIN EN 13759 |
Furniture - Operating mechanisms for seating and sofa-beds - Test methods; German version EN 13759:2012
|
DIN EN 13761 |
Büromöbel;Besucherstuhl;Deutsche Fassung prEN 13761 : 1999;;
Büromöbel;entar - Nr. Besucherstühle;Deutsche Fassung EN 13761:2002;; |
DIN EN 13845 |
Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification; German version EN 13845:2005
|
DIN EN 1399 |
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes; German version EN 1399:1997
|
DIN EN 14041 |
Resilient, textile and laminate floor coverings - Essential characteristics; German version EN 14041:2004+AC:2005+AC:2006
|
DIN EN 14074 |
Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts; German version EN 14074:2004
|
DIN EN 14351-1 |
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets; German version EN 14351-1:2006+A2:2016
|
DIN EN 14354 |
Wood-based panels - Wood veneer floor covering; German version EN 14354:2004
|
DIN EN 14374 |
Timber structures - Structural laminated veneer lumber - Requirements; German version EN 14374:2004
|
DIN EN 14608 |
Windows - Determination of the resistance to racking; German version EN 14608:2004
|
DIN EN 14609 |
Windows - Determination of the resistance to static torsion; German version EN 14609:2004
|
DIN EN 14727 |
Laboratory furniture - Storage units for laboratories - Requirements and test methods; German version EN 14727:2005
|
DIN EN 14749 |
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods; German version EN 14749:2016
|
DIN EN 152 |
Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method; German version EN 152:2011
|
DIN EN 1530 |
Door leaves - General and local flatness - Tolerance classes; German version EN 1530:1999
|
DIN EN 15338 |
Hardware for furniture - Strength and durability of extension elements and their components; German version EN 15338:2007+A1:2010
|
DIN EN 15372 |
Furniture - Strength, durability and safety - Requirements for non-domestic tables; German version EN 15372:2016
|
DIN EN 15373 |
Möbel ‐Festigkeit, Dauerhaltbarkeit und Sicherheit ‐
|
DIN EN 15457 |
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi; German version EN 15457:2014
|
DIN EN 15458 |
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae; German version EN 15458:2014
|
DIN EN 15570 |
Hardware for furniture - Strength and durability of hinges and their components - Hinges pivoting on a vertical axis; German version EN 15570:2008
|
DIN EN 1602 |
Thermal insulating products for building applications - Determination of the apparent density; German version EN 1602:2013
|
DIN EN 1603 |
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity); German version EN 1603:2013
|
DIN EN 1604 |
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:2013
|
DIN EN 1606 |
Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:2013
|
DIN EN 1607 |
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:2013
|
DIN EN 1608 |
Thermal insulating products for building applications - Determination of tensile strength parallel to faces; German version EN 1608:2013
|
DIN EN 1609 |
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion; German version EN 1609:2013
|
DIN EN 1627 |
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification; German version EN 1627:2011
|
DIN EN 1629 |
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading; German version EN 1629:2011+A1:2015
|
DIN EN 1630 |
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts; German version EN 1630:2011+A1:2015
|
DIN EN 1725 |
Domestic furniture - Beds and mattresses - Safety requirements and test methods; German version EN 1725:1998
|
DIN EN 1728 |
Furniture - Seating - Test methods for the determination of strength and durability; German version EN 1728:2012 + AC:2013
|
DIN EN 1730 |
Furniture - Tables - Test methods for the determination of stability, strength and durability; German version EN 1730:2012
|
DIN EN 1930 |
Child use and care articles - Safety barriers - Safety requirements and test methods; German version EN 1930:2011
|
DIN EN 205 |
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2016
|
DIN EN 29052-1 |
Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings; german version EN 29052-1:1991
|
DIN EN 29053 |
Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991); German version EN 29053:1993
|
DIN EN 300 |
Oriented Strand Boards (OSB) - Definitions, classification and specifications; German version EN 300:2006
|
DIN EN 302-1 |
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength; German version EN 302-1:2013
|
DIN EN 302-2 |
Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination; German version EN 302-2:2013
|
DIN EN 302-3 |
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2013
|
DIN EN 302-4 |
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength; German version EN 302-4:2013
|
DIN EN 302-6 |
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2013
|
DIN EN 309 |
Particleboards - Definition and classification; German version EN 309:2005
|
DIN EN 310 |
Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
|
DIN EN 311 |
Wood-based panels - Surface soundness - Test method; German version EN 311:2002
|
DIN EN 312 |
Particleboards - Specifications; German version EN 312:2010
|
DIN EN 313-2 |
Plywood - Classification and terminology - Part 2: Terminology; German version EN 313-2:1999
|
DIN EN 314-1 |
Plywood - Bonding quality - Part 1: Test methods; German version EN 314-1:2004
|
DIN EN 314-2 |
Plywood; bonding quality; part 2: requirements; German version EN 314-2:1993
|
DIN EN 315 |
Plywood - Tolerances for dimensions; German version EN 315:2000
|
DIN EN 316 |
Wood fibreboards - Definition, classification and symbols; German version EN 316:2009
|
DIN EN 317 |
Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993
|
DIN EN 318 |
Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; German version EN 318:2002
|
DIN EN 321 |
Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001
|
DIN EN 322 |
Wood-based panels; determination of moisture content; German version EN 322:1993
|
DIN EN 326-1 |
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994
|
DIN EN 384 |
Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2016
|
DIN EN 385 |
Keilzinkenverbindungen in Bauholz;Leistungs- und Mindestanforderungen an die Herstellung;Deutsche Fassung EN 385:1995;;
Keilzinkenverbindungen im Bauholz;Leistungsanforderungen und Mindestanforderungen an;die Herstellung;Deutsche Fassung EN 385:2001;; |
DIN EN 386 |
Brettschichtholz;Leistungs- und Mindestanforderungen an die Herstellung;Deutsche Fassung EN 386:1995;;
Brettschichtholz;Leistungsanforderungen und Mindestanforderungen an;die Herstellung;Deutsche Fassung EN 386:2001;; |
DIN EN 387 |
Brettschichtholz Universal‐Keilzinkenverbindungen ‐Leistungsan
|
DIN EN 390 |
Brettschichtholz -Maße -Grenzabmaße
|
DIN EN 391 |
Brettschichtholz;Delaminierungsprüfung von Leimfugen;Deutsche Fassung EN 391 :1995;;
|
DIN EN 392 |
Brettschichtholz;Scherprüfung der Leimfugen;Deutsche Fassung EN 392:1995;;
|
DIN EN 408 |
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties; German version EN 408:2010+A1:2012
|
DIN EN 409 |
Timber structures - Test methods - Determination of the yield moment of dowel type fasteners; German version EN 409:2009
|
DIN EN 433 |
Elastische Bodenbeläge -Bestimmung des Resteindruckes nach konstanter Belastung
|
DIN EN 438-2 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016
|
DIN EN 596 |
Timber structures - Test methods - Soft body impact test of timber framed walls; German version EN 596:1995
|
DIN EN 597-2 |
Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 2: Ignition source: match flame equivalent; German version EN 597-2:2015
|
DIN EN 60068-2-10 |
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (IEC 60068-2-10:2005); German version EN 60068-2-10:2005
|
DIN EN 60243-2 |
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2013); German version EN 60243-2:2014
|
DIN EN 61340-4-1 |
Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors (IEC 61340-4-1:2003 + A1:2015); German version EN 61340-4-1:2004 + A1:2015
|
DIN EN 61340-5-1 |
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements (IEC 61340-5-1:2007); German version EN 61340-5-1:2007
|
DIN EN 633 |
Cement-bonded particleboards; definition and classification; German version EN 633:1993
|
DIN EN 71-1 |
Safety of toys - Part 1: Mechanical and physical properties; German version EN 71-1:2014
|
DIN EN 717-3 |
Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method; German version EN 717-3:1996
|
DIN EN 71-8 |
Safety of toys - Part 8: Activity toys for domestic use; German version EN 71-8:2011
|
DIN EN 73 |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure; German version EN 73:2014
|
DIN EN 789 |
Timber structures - Test methods - Determination of mechanical properties of wood based panels; German version EN 789:2004
|
DIN EN 822 |
Thermal insulating products for building applications - Determination of length and width; German version EN 822:2013
|
DIN EN 823 |
Thermal insulating products for building applications - Determination of thickness; German version EN 823:2013
|
DIN EN 824 |
Thermal insulating products for building applications - Determination of squareness; German version EN 824:2013
|
DIN EN 825 |
Thermal insulating products for building applications - Determination of flatness; German version EN 825:2013
|
DIN EN 826 |
Thermal insulating products for building applications - Determination of compression behaviour; German version EN 826:2013
|
DIN EN 84 |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:1997
|
DIN EN 927-5 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability; German version EN 927-5:2006
|
DIN EN 927-6 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water; German version EN 927-6:2006
|
DIN EN 947 |
Hinged or pivoted doors - Determination of the resistance to vertical load; German version EN 947:1998
|
DIN EN 948 |
Hinged or pivoted doors - Determination of the resistance to static torsion; German version EN 948:1999
|
DIN EN 949 |
Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors; German version EN 949:1998
|
DIN EN 950 |
Door leaves - Determination of the resistance to hard body impact; German version EN 950:1999
|
DIN EN 951 |
Door leaves - Method for measurement of height, width, thickness and squareness; German version EN 951:1998
|
DIN EN 952 |
Door leaves - General and local flatness - Measurement method; German version EN 952:1999
|
DIN EN ISO 10077-2 |
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012); German version EN ISO 10077-2:2012
|
DIN EN ISO 10211 |
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007); German version EN ISO 10211:2007
|
DIN EN ISO 105-02 |
Textilien - Farbechtheitsprüfungen - Teil N02: Bestimmung der Farbechtheit gegen Bleichen: Peroxid (ISO 105-N02:1993); Deutsche Fassung EN ISO 105-N02:1995
|
DIN EN ISO 105-12 |
Textilien - Farbechtheitsprüfungen - Teil X12: Farbechtheit gegen Reiben (ISO/FDIS 105-X12:2016); Deutsche und Englische Fassung FprEN ISO 105-X12:2016
|
DIN EN ISO 11341 |
Außengehäuse für nicht wettergeschützten Einsatz (Freiluftklima) in den Bereichen Telekommunikation, Signal- und Verkehrsleittechnik sowie Stromversorgung im Niederspannungsbereich - Anforderungen und Prüfungen
|
DIN EN ISO 1182 |
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010); German version EN ISO 1182:2010
|
DIN EN ISO 1183-1 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
|
DIN EN ISO 11925-2 |
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010); German version EN ISO 11925-2:2010
|
DIN EN ISO 11998 |
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006); German version EN ISO 11998:2006
|
DIN EN ISO 12567-1 |
Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010); German version EN ISO 12567-1:2010
|
DIN EN ISO 12567-2 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005); German version EN ISO 12567-2:2005
|
DIN EN ISO 12572 |
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); German version EN ISO 12572:2001
|
DIN EN ISO 14183 |
Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization (ISO 14183:2005); German version EN ISO 14183:2008
|
DIN EN ISO 14257 |
Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001
|
DIN EN ISO 14577-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
|
DIN EN ISO 1518-1 |
Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011); German version EN ISO 1518-1:2011
|
DIN EN ISO 1522 |
Paints and varnishes - Pendulum damping test (ISO 1522:2006); German version EN ISO 1522:2006
|
DIN EN ISO 16000-10 |
Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006); German version EN ISO 16000-10:2006
|
DIN EN ISO 16000-11 |
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); German version EN ISO 16000-11:2006
|
DIN EN ISO 16000-3 |
Innenraumluftverunreinigungen - Teil 3: Messen von Formaldehyd und anderen Carbonylverbindungen in der Innenraumluft und in Prüfkammern - Probenahme mit einer Pumpe (ISO 16000-3:2011)
|
DIN EN ISO 16000-6 |
Innenraumluftverunreinigungen - Teil 6: Bestimmung von VOC in der Innenraumluft und in Prüfkammern, Probenahme auf Tenax TA®, thermische Desorption und Gaschromatographie mit MS oder MS-FID (ISO 16000-6:2011)
|
DIN EN ISO 16000-9 |
Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006); German version EN ISO 16000-9:2006
|
DIN EN ISO 1628 |
|
DIN EN ISO 1716 |
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010); German version EN ISO 1716:2010
|
DIN EN ISO 178 |
Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013
|
DIN EN ISO 179 |
DIN EN ISO 180
|
DIN EN ISO 179-1 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010
|
DIN EN ISO 179-2 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
|
DIN EN ISO 1798 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008); German version EN ISO 1798:2008
|
DIN EN ISO 1856 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000+Amd 1:2007); German version EN ISO 1856:2000+A1:2007
|
DIN EN ISO 1923 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995
|
DIN EN ISO 20105-02 |
Textilien - Farbechtheitsprüfungen - Teil A02: Graumaßstab zur Bewertung der Änderung der Farbe (ISO 105-A02:1993); Deutsche Fassung EN 20105-A02:1994
|
DIN EN ISO 204 |
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009); German version EN ISO 204:2009
|
DIN EN ISO 2409 |
Paints and varnishes - Cross-cut test (ISO 2409:2013); German version EN ISO 2409:2013
|
DIN EN ISO 2439 |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
|
DIN EN ISO 2440 |
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997 + Amd.1:2010 + Amd.2:2014); German version EN ISO 2440:1999 + A1:2010 + A2:2014
|
DIN EN ISO 252 |
Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2007); German version EN ISO 252:2007
|
DIN EN ISO 2808 |
Paints and varnishes - Determination of film thickness (ISO 2808:2007); German version EN ISO 2808:2007
|
DIN EN ISO 2813 |
Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014); German version EN ISO 2813:2014
|
DIN EN ISO 3251 |
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008); German version EN ISO 3251:2008
|
DIN EN ISO 3385 |
Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014); German version EN ISO 3385:2014
|
DIN EN ISO 3386-1 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:1986 + Amd 1:2010); German version EN ISO 3386-1:1997 + A1:2010
|
DIN EN ISO 3386-2 |
Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010); German version EN ISO 3386-2:1998 + A1:2010
|
DIN EN ISO 3668 |
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998); German version EN ISO 3668:2001
|
DIN EN ISO 4624 |
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016); German version EN ISO 4624:2016
|
DIN EN ISO 4628-1 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016); German version EN ISO 4628-1:2016
|
DIN EN ISO 4628-2 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016); German version EN ISO 4628-2:2016
|
DIN EN ISO 4628-3 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016
|
DIN EN ISO 4628-4 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016); German version EN ISO 4628-4:2016
|
DIN EN ISO 4628-5 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016); German version EN ISO 4628-5:2016
|
DIN EN ISO 4628-6 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011); German version EN ISO 4628-6:2011
|
DIN EN ISO 4628-7 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016); German version EN ISO 4628-7:2016
|
DIN EN ISO 4892-2 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013); German version EN ISO 4892-2:2013
|
DIN EN ISO 4892-3 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016); German version EN ISO 4892-3:2016
|
DIN EN ISO 527-1 |
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012); German version EN ISO 527-1:2012
|
DIN EN ISO 527-2 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
|
DIN EN ISO 527-3 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002
|
DIN EN ISO 604 |
Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003
|
DIN EN ISO 62 |
Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
|
DIN EN ISO 6504-3 |
Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006); German version EN ISO 6504-3:2007
|
DIN EN ISO 6892-1 |
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016); German version EN ISO 6892-1:2016
|
DIN EN ISO 6946 |
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:2007); German version EN ISO 6946:2007
|
DIN EN ISO 717-1 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013); German version EN ISO 717-1:2013
|
DIN EN ISO 717-2 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013); German version EN ISO 717-2:2013
|
DIN EN ISO 7493 |
Dentistry - Operator's stool (ISO 7493:2006); German version EN ISO 7493:2006
|
DIN EN ISO 8307 |
Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007); German version EN ISO 8307:2007
|
DIN EN ISO 845 |
Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006); German version EN ISO 845:2009
|
DIN EN ISO 9239-1 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010); German version EN ISO 9239-1:2010
|
DIN Fachbericht 147 |
Anforderungen und Prüfungen von Büromöbeln - Leitfaden für die Sicherheitsanforderungen an Büro-Arbeitstische und Büroschränke in Deutschland
|
DIN IEC 60093 |
Prüfverfahren für Elektroisolierstoffe, Spezifischer Durchgangswiderstand
|
DIN V 18032-2 |
DIN EN 14904 2006-06
|
DIN V ENV 12038 |
Dauerhaftigkeit von Holz und Holzwerkstoffen -Holzwerkstoff
|
DIN V ENV 807 |
Dämmstoffe
|