GMA-Werkstoffprüfung GmbH

Testing laboratory in Düsseldorf, Germany

Verified

Qualität zu liefern - ergebnisorientiert und punktgenau auf die Aufgabenstellungen unserer Kunden und Partner, dafür stehen über 700 qualifizierte Mitarbeiter und darauf sind wir stolz! Denn wer seit über 25 Jahren erfolgreich national und international im Bereich Werkstoffprüfung arbeitet, kennt die Anforderungen und Bedürfnisse der Industrie und Wirtschaft sprichwörtlich im Detail.

Aus diesem Wissen schöpfen wir Lösungen, schaffen Synergien und beweisen, dass Visionen nur durch solide Arbeit im Detail realisiert werden.

Zu den Tätigkeitsfeldern der GMA-GROUP gehören primär die Qualitätssicherung und anspruchsvolle Werkstoffprüfungen in sensiblen Industriebereichen wie z.B. der Luft- und Raumfahrt - aber auch Ingenieurleistungen und Personaldienstleistungen. Wir finden die Fachkräfte, die präzise zu Ihren Unternehmensanforderungen und Aufgabenstellungen passen. Ein einzigartiges Dienstleistungsportfolio - damit aus Herausforderungen Lösungen werden.

Specification of Services

Test areas

Testing > Material Analytics > Failure Analysis Testing > Material Analytics > NDT Testing > Material Analytics > Physical

Offered test methods / services

3D Messtechnik Zugversuche

Testing Standards

Accreditations for Testing Standards

ACCRED. BODY

ACCRED. STANDARD

DAkkS DIN EN ISO/IEC 17025

Supported Testing Standards

Testing Standard

Description

A/000
AA MWL 146
AD 2000
AITM 1-0002
AITM 1-0003
Determination of the glass transition temperatures
AITM 1-0005
AITM 1-0007
AITM 1-0008
AITM 1-0008
AITM 1-0009
AITM 1-0009
Airbus Test Method Fibre Reinforced Plastics Determination of bearing strength by bolt bearing configuration
AITM 1-0010
AITM 1-0053
AITM 1-0060
AITM 1-0069
AITM 1-0070
AITM 3-0001
AITM 3-0002
AITM 3-0003
AITM 3-0008
AITM 3-0027
AITM 3-0029
AITM 3-0030
AITM 3-0032
AITM 3-0034
AITM 3-0035
AITM 3-0036
AITM 3-0037
AITM 4-0003
ASTM A 923
AITM 6-0011
AMS 2631
ANSI/ASME B31.1
ANSI/ASME B31.3
ASTM A262
ASTM A370
Standard Test Methods and Definitions for Mechanical Testing
ASTM D3039
TEST METHOD FOR TENSILE PROPERTIES OF POLYMER MATRIX COMPOSITE MATERIALS
ASTM E112
Standard Test Methods for Determining Average Grain Size
ASTM E21
ASTM E562
Bestimmung des Volumenanteils mittels
ASTM G48
AVS D 63
DIN 25435-4
In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing
DIN 50141
Prüfung metallischer Werkstoffe -Scherversuch
DIN 50190-3
Hardness depth of heat-treated parts; determination of the effective depth of hardening after nitriding
DIN 50190-4
Hardness depth of heat-treated parts - Part 4: Determination of the fusion hardening depth and the fusion depth
DIN 53295
Testing of sandwiches; Peel test by means of a drum
DIN 54111-1
Zerstörungsfreie Prüfung -Prüfung metallischer Werkstoffe mit
DIN 54111-2
Zerstörungsfreie Prüfung -Prüfung metallischer Werkstoffe mit
DIN 65583
Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load
DIN EN 10160
Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method); German version EN 10160:1999
DIN EN 10164
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions; German version EN 10164:2004
DIN EN 10228-3
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; German version EN 10228-3:2016
DIN EN 10247
Micrographic examination of the non-metallic inclusion content of steels using standard pictures; German version EN 10247:2007
DIN EN 12680-1
Founding - Ultrasonic examination - Part 1: Steel castings for general purposes; German version EN 12680-1:2003
DIN EN 12680-2
Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components; German version EN 12680-2:2003
DIN EN 12680-3
Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings; German version EN 12680-3:2011
DIN EN 12681
Founding - Radiographic examination; German version EN 12681:2003
DIN EN 12817
LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m<sup>3</sup>; German version EN 12817:2010
DIN EN 12819
LPG equipment and accessories - Inspection and requalification of LPG tanks greater than 13 m<sup>3</sup>; German version EN 12819:2009
DIN EN 13184
Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
DIN EN 13185
Non-destructive testing - Leak testing - Tracer gas method; German version EN 13185:2001
DIN EN 1369
Founding - Magnetic particle testing; German version EN 1369:2012
DIN EN 1370
Founding - Examination of surface condition; German version EN 1370:2011
DIN EN 14127
Non-destructive testing - Ultrasonic thickness measurement; German version EN 14127:2011
DIN EN 14584
Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
DIN EN 15495
Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; German version EN 15495:2007
DIN EN 15856
Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN EN 15857
Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria; German version EN 15857:2010
DIN EN 1593
Non-destructive testing - Leak testing - Bubble emission techniques; German version EN 1593:1999
DIN EN 2002-001
Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005
DIN EN 2002-002
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005
DIN EN 20898-7
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN EN 2243-1
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005
DIN EN 2243-2
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
DIN EN 2243-3
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005
DIN EN 2329
Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993
DIN EN 2332
Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993
DIN EN 2557
Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997
DIN EN 2558
Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997
DIN EN 2559
Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997
DIN EN 2560
Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998
DIN EN 2561
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995
DIN EN 2563
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997
DIN EN 2564
Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998
DIN EN 2743
Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
DIN EN ISO 10228-1
DIN EN ISO 10228-2
DIN EN ISO 10228-4
DIN EN ISO 10893-1
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011); German version EN ISO 10893-1:2011
DIN EN ISO 10893-10
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011); German version EN ISO 10893-10:2011
DIN EN ISO 10893-2
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011); German version EN ISO 10893-2:2011
DIN EN ISO 10893-4
Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011); German version EN ISO 10893-4:2011
DIN EN ISO 10893-8
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011); German version EN ISO 10893-8:2011
DIN EN ISO 11357-1
Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016); German version EN ISO 11357-1:2016
DIN EN ISO 11357-2
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013), German version EN ISO 11357-2:2014
DIN EN ISO 11357-3
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN EN ISO 11357-4
Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014); German version EN ISO 11357-4:2014
DIN EN ISO 11357-5
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN ISO 1172
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998
DIN EN ISO 1183-1
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
DIN EN ISO 11885
Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007); German version EN ISO 11885:2009
DIN EN ISO 13588
Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012); German version EN ISO 13588:2012
DIN EN ISO 14125
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN ISO 14126
Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999
DIN EN ISO 14129
Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN EN ISO 14130
Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997
DIN EN ISO 148-1
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009); German version EN ISO 148-1:2010
DIN EN ISO 15549
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2008); German version EN ISO 15549:2010
DIN EN ISO 15626
Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2011); German version EN ISO 15626:2013
DIN EN ISO 16823
Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 16826
Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
DIN EN ISO 17405
Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014); German version EN ISO 17405:2014
DIN EN ISO 17636-1
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013); German version EN ISO 17636-1:2013
DIN EN ISO 17637
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003); German version EN ISO 17637:2011
DIN EN ISO 17638
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016); German version EN ISO 17638:2016
DIN EN ISO 17640
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010); German version EN ISO 17640:2010
DIN EN ISO 178
Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013
DIN EN ISO 2409
Paints and varnishes - Cross-cut test (ISO 2409:2013); German version EN ISO 2409:2013
DIN EN ISO 2639
Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002); German version EN ISO 2639:2002
DIN EN ISO 3452-1
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01); German version EN ISO 3452-1:2013
DIN EN ISO 3506-1
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009
DIN EN ISO 3506-2
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009
DIN EN ISO 3651-1
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German version EN ISO 3651-1:1998
DIN EN ISO 3651-2
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2:1998
DIN EN ISO 3887
Steels - Determination of depth of decarburization (ISO 3887:2003); German version of EN ISO 3887:2003
DIN EN ISO 4136
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012); German version EN ISO 4136:2012
DIN EN ISO 4628-2
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016); German version EN ISO 4628-2:2016
DIN EN ISO 5173
Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN ISO 527-1
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012); German version EN ISO 527-1:2012
DIN EN ISO 527-2
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN EN ISO 527-3
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002
DIN EN ISO 527-4
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997
DIN EN ISO 527-5
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009); German version EN ISO 527-5:2009
DIN EN ISO 642
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999
DIN EN ISO 643
Steels - Micrographic determination of the apparent grain size (ISO 643:2012); German version EN ISO 643:2012
DIN EN ISO 6506-1
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014); German version EN ISO 6506-1:2014
DIN EN ISO 6507-1
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005); German version EN ISO 6507-1:2005
DIN EN ISO 6508-1
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016
DIN EN ISO 6892-1
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016); German version EN ISO 6892-1:2016
DIN EN ISO 6892-2
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011); German version EN ISO 6892-2:2011
DIN EN ISO 8492
Metallic materials - Tube - Flattening test (ISO 8492:2013); German version EN ISO 8492:2013
DIN EN ISO 8493
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998); German version EN ISO 8493:2004
DIN EN ISO 8495
Metallic materials - Tube - Ring-expanding test (ISO 8495:2013); German version EN ISO 8495:2013
DIN EN ISO 898-1
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013
DIN EN ISO 898-2
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012
DIN EN ISO 9015-1
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001); German version EN ISO 9015-1:2011
DIN EN ISO 9015-2
Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016); German version EN ISO 9015-2:2016
DIN EN ISO 9016
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012); German version EN ISO 9016:2012
DIN EN ISO 9227
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2012); German version EN ISO 9227:2012
DIN EN ISO 9934-1
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016); German version EN ISO 9934-1:2016
DIN ISO 4386-1
Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness &gt;= 0,5 mm (ISO 4386-1:2012)
HP 5/3
Prüfung der Schweißverbindungen
HV 10
HV 30
HVS ASME VA MT 02
HVS ASME VA PT 04
HVS ASME VA RT 01
HVS ASME VA UT 03
HVS PA MTP 08
HVS PA UT 01
Ultraschall-Impuls-Echo-Prüfung an Kohlefaserkunststoffen
HVS PA UT 05
Bewertung von Anzeigen in Faserverbundwerkstoffen
HVS VA AT 29
HVS VA BA 18
Bildanalytisches Verfahren zur Bestimmung von Faser-, Harz-
HVS VA BA 19
Metallographische Prüfungen, makroskopisch und mikroskopisch; St
HVS VA DMA 21
Dynamisch-Mechanische Analyse für faserverstärkte Werkstoffe
HVS VA DRT 01.2
HVS VA DSC 22
HVS VA ET 08.1
HVS VA ET 08.2
HVS VA ET 08.3
HVS VA FT IR 10
HVS VA HPLC H 13
HVS VA HT 24
HVS VA ILTS 01
HVS VA KL 01
Klangprüfung
HVS VA LSI 23
HVS VA LT 25
HVS VA MR 01
HVS VA MT 02
HVS VA OES 56
HVS VA PT 04
HVS VA RT 01
HVS VA UT 010
HVS VA UT 03
Manuelle Ultraschallprüfung
HVS VA UT 060
HVS VA UT 11
HVS VA UT 73
ISO 15024
Fibre-reinforced plastic composites - Determination of Mode I interlaminar fracture toughness, G<sub>IC</sub>, for unidirectionally reinforced materials
ISO 4967
Steel - Determination of content of non-metallic inclusions - Micrographic method using standard diagrams
LN 65150
NASM 1312-13
QVA Z09-07-27
QVA Z09-07-36
QVA Z09-11-01
QVA Z09-19-01
QVA Z09-20-00
QVA Z09-22-00
QVA Z09-23-00
QVA Z09-25-00
QVA Z10-37-04
QVA-Z10-37-05
QVA Z10-46-01
QVA Z10-46-03
QVA Z10-46-05
QVA Z10-46-07
QVA Z10-46-08
QVA Z10-46-10
QVA Z10-46-12
QVA Z10-46-18
QVA Z10-46-20
QVA Z10-46-33
QVA Z10-54
Metallographische Prüfungen, mikroskopisch -Allgemeines
QVA Z10-59-01
QVA Z10-59-04
SAE AMS 2630
SAE AMS STD 2154
SEL 072
Ultraschallgeprüftes Grobblech -Technische Lieferbedingungen
SEP 1390
Aufschweißbiegeversuch
SEP 1520
Mikroskopische Prüfung der Carbidausbildung in Stählen mit Bild
SEP 1870
SEP 1877
Metalle
SEP 1915
Ultraschallprüfung von Stahlrohren auf Längsfehler
SEP 1918
Ultraschallprüfung von Stahlrohren auf Querfehler
SEP 1919
Ultraschallprüfungen von Dopplungen von Rohren aus warm
SEP 1920
Ultraschallprüfung von gewalztem Halbzeug auf innere Werk
SEP 1922
Ultraschallprüfung von Gussstücken aus ferritischem Stahl
SEP 1923
Ultraschallprüfung von Schmiedestücken mit höheren Anforde
SEP 1936
Oberflächenrissprüfung von Gussstücken aus Stahl -Eindring

GMA-Werkstoffprüfung GmbH is currently available.

Request this lab for your testing project now. After submitting your request, you will be able to add more labs anytime:

Lab location:

40549, Düsseldorf, Germany