SKZ - Das Kunststoffzentrum

Testing laboratory in Würzburg, Germany

Verified

About the laboratory

Kunststoffprodukte begleiten uns durch den ganzen Tag und meist ein Leben lang. Häufig steht eine sichere Funktion, eine hohe Praxistauglichkeit und eine lange Lebensdauer im Vordergrund. Handelt es sich beispielsweise um Medizinprodukte, von denen Menschenleben abhängen oder um Bauprodukte, die erwartungsgemäß eine lange Lebensdauer aufweisen müssen, so ist die umfassende Prüfkompetenz des SKZ gefragt.

Das unabhängige, neutrale und nach DIN EN ISO/IEC 17025 akkreditierte Prüflabor testet Kunststoffprodukte nach ca. 1.000 Normen und technischen Regelwerken. Diese Prüfaktivitäten gehen meist Hand in Hand mit unseren Maßnahmen zur Güte- und Qualitätssicherung, welche durch unsere, nach DIN EN ISO/IEC 17020 akkreditierte Inspektionsstelle des Typs A initiiert werden.

Das im eigenen Hause etablierte SKZ-Zeichen bescheinigt als Qualitätssiegel den geprüften Produkten, dass sie die Schritte Prüfung, Überwachung und Zertifizierung erfolgreich durchlaufen haben und die geprüften Produkte die hohen Qualitätsanforderungen erfüllen.

Geht es um die Analyse und Optimierung von Prozessabläufen, die Bewertung von Verarbeitungstechniken und Werkzeugen oder um die Durchführung von komplexen Schadensanalysen, so stehen die Experten des SKZ jederzeit bereit. Dieses Wissen stellen wir Unternehmen, Verarbeitern, Versicherungen, Gerichten und Ihnen gerne zur Verfügung. Die absolute Neutralität und Unabhängigkeit in Verbindung mit dem seit 50 Jahren aufgebauten Expertenwissen sind ein Garant dafür, dass wir ein sachverständiger, kompetenter und zuverlässiger Ansprechpartner für alle Ihre Fragen rund um das Themengebiet „Kunststoff“ sind. Hierfür stehen wir mit unserem Namen „SKZ – Das Kunststoff-Zentrum“.

Specification of Services

Test areas

Testing > Material Analytics > Chemical Testing > Material Analytics > Environmental Simulation Testing > Material Analytics > Failure Analysis Testing > Material Analytics > NDT Testing > Material Analytics > Physical Testing > Material Analytics > Thermodynamical Testing > Construction > Construction Material Testing > Construction > Fire Behavior Testing > Construction > Paints Testing > Construction > Structure Testing > Industry components > Automotive

Offered test methods / services

Beständigkeitstests Bewitterung Schadensanalyse Thermische Prüfverfahren chemische Prüfung mechanische Prüfung physikalische Analyse

Material categories of material analytics

Plastic Textile

Test objects / materials

Bauteile Prüfkörper

Testing Standards

Accreditations for Testing Standards

ACCRED. BODY

ACCRED. STANDARD

DAkkS DIN EN ISO/IEC 17025
DAkkS DIN EN ISO/IEC 17025

Supported Testing Standards

Testing Standard

Description

AG PV 1200
AG PV 3900
AG PV 3929
AG PV 3930
AS 1145.1-2001
AS 2537-1994
AS 4176-1994
AS 4176-1994
AS/NZS 1477
AS/NZS 2492
ASTM D1004
ASTM D 638
ASTM D1388-08
ASTM D1598-02
ASTM D1599
ASTM D1603-12
ASTM D1693-12
ASTM D1709-09
ISO 3387
ASTM D2765-11
ASTM D 2837-11
ASTM D2837-11
ÖNORM B 5140
ASTM D3330
ASTM D3418
ASTM D3895-07
ASTM D3985-05
ASTM D4060-10
ISO 2528
ASTM D4603-03
ASTM D4632-08
ASTM D4886-10
ASTM D5261-10
ASTM D5397-07
ASTM D5596-03
ASTM D5617-04
ASTM D570-98
ASTM D5887-09
ASTM D5890-11
ASTM D618-08
ASTM G 151-10
ASTM D6243-13
ASTM D635-10
MVSS 302
ASTM D638
Standard Test Method for Tensile Properties of Plastics
ASTM D6496-04
ASTM D6575-00
ASTM D6637-11
ASTM D6693
DIN ISO 3384
ASTM D7466-10
ASTM D7869
ASTM D792-08
ISO 9352
ASTM D882
OCH
ASTM E96
ASTM F1292-09
ASTM G151-10
ASTM G154-12
ASTM G155-05
B 5140
B 5174-1
B 5193-1
BPG T 3-1
BPG T 3-3
BPG T 3-4
BRL K536
BRL K536-03
BRL K536-04
DIN 1187
Unplasticized polyvinyl chloride (PVC-U) drainpipes; Dimesions, requirements, testing
DIN 13013
Latex foam hospital mattresses; dimensions, requirements, testing
DIN 13014
Polyether foam hospital mattresses; dimensions, requirements, testing
DIN 16726
Plastic sheets - Testing
DIN 16830-1
High impact polyvinyl chloride (PVC-HI) window profiles; testing
DIN 16831-5
Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing
DIN 16832-2
DIN 16833
Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing
DIN 16836
Multilayer pipes - Polyolefin-Aluminium-Multilayer pipes - General requirements and testing
DIN 16837
Multilayer pipes - Plastics-Multilayer pipes - General quality requirements and testing
DIN 16841
Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN 16869-2
Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing
DIN 16874
Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions and technical delivery conditions
DIN 16878
Pipes and fittings of polypropylene (PP) for buried cable ducting - Dimensions and technical delivery conditions
DIN 16887
Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
DIN 16889-1
Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes
DIN 16892
Crosslinked polyethylene (PE-X) pipes - General requirements, testing
DIN 16894
Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN 16906
Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16961-2
Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
DIN 16962-5
DIN 16964
Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing
DIN 16966-1
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing
DIN 16966-7
Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
DIN 18032-3
Sport halls - Halls for gymnastics, games and multi-purpose use - Part 3: Testing of safety against ball throwing
DIN 18121-1
Baugrund, Untersuchung von Bodenproben;Wassergehalt;Teil 1: Bestimmung durch Ofentrocknung;;

DIN 18132
Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18541-1
Termoplastic waterstops for sealing joints in concrete - Part 1: Terms and definitions, shapes, dimensions, marking
DIN 18541-2
Thermoplastic waterstops for sealing joints in concrete - Part 2: Material requirements, testing and inspection
DIN 3544-1
High-density polyethylene (HDPE) valves; tapping valves; requirements and test
DIN 3761-15
DIN 53541
DIN 4060
Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals
DIN 4102-1
Fire behaviour of building materials and building components - Part 1: Building materials; concepts, requirements and tests
DIN 4262-1
Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 1: Pipes, fittings and their joints made from PVC-U, PP and PE
DIN 4262-3
Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 3: Pipes and fittings made from concrete and their joints
DIN 4266-1
Drainage pipes for landfills - Part 1: Drainage pipes made from PE and PP
DIN 4724
Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
DIN 4726
Warm water surface heating systems and radiator connecting systems - Plastics piping systems and multilayer piping systems
DIN 5036-3
Radiometric and photometric properties of materials; methods of measurement for photometric and spectral radiometric characteristics
DIN 50986
Paints and varnishes - Determination of dry-film thickness using the wedge-cut method (scribe and drill method)
DIN 51045-1
Determination of the thermal expansion of solids - Part 1: Basic rules
DIN 51562-3
Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
DIN 52123
Testing of bitumen and polymer bitumen sheets
DIN 52306
Ball drop test on safety glass for vehicle glazing
DIN 52307
Dart drop test on safety glass for vehicle glazing
DIN 52451-1
Testing of sealing in building construction - Part 1: Determination of change in mass and volume of self-levelling sealants after treatment at elevated temperature
DIN 52452-2
Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids
DIN 52452-4
Testing of sealing compounds in building constructions - Compatibility of sealing products - Part 4: Compatibility with other protection coatings
DIN 52453-2
Testing of sealing compounds for sealing and glazing in building constructions - Part 2: Determination of the migration of binder by filter paper method
DIN 52455-1
Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water or increased temperatures
DIN 52455-3
DIN 53122-1
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
DIN 53236
Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
DIN 53291
Testing of sandwiches; Compression test perpendicular to the faces
DIN 53292
Testing of sandwiches; Tensile test perpendicular to the faces
DIN 53293
Testing of sandwiches; Bending test
DIN 53294
Testing of sandwiches; Shear test
DIN 53356
Prüfung von Kunstleder und ähnlichen Flächengebilden Weiterreißversuch
DIN 53357
Schub-Modul Schubfestigkeit Bruchdehnung
DIN 53359
Testing of artificial leather and similar sheet materials - Flex cracking test
DIN 53360
Prüfung von Kunstleder und ähnlichen Flächengebilden Bestimmung der
DIN 53363
Testing of plastic films - Tear test using trapezoidal test specimen with incision
DIN 53366
Testing of plastic films and sheetings - Determination of blocking strength
DIN 53369
Testing of plastic films; determination of the shrinking stress
DIN 53370
Testing of plastics films - Determination of the thickness by mechanical scanning
DIN 53377
Testing of plastic films - Determination of dimensional stability
DIN 53380-3
Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
DIN 53381-1
DIN 53383-2
DIN 53428
DIN 53390
DIN 53399-2
Testing of reinforced plastics; shear test on plane specimens
DIN 53419
DIN 53421
Prüfung von harten Schaumstoffen, Druckversuch
DIN 53423
Belastungsart
DIN 53428
Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
DIN 53430
Maximalspan-nungen [N/mm], Mittelwert oder Medianwert der Spannungs-spitzen
DIN 53435
Testing of plastics; bending test and impact test on dynstat test pieces
DIN 53438-2
Testing of combustible materials; response to ignition by a small flame; edge ignition
DIN 53438-3
Testing of combustible materials; response to ignition by a small flame; surface ignition
DIN 53441
DIN 53504
DIN 53477
Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
DIN 53483-1
Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information
DIN 53483-2
Testing of Insulating Materials; Determination of Dielectric Properties; Testing at Standard Frequencies of 50 Hz, 1 kHz, 1 MHz
DIN 53497
Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
DIN 53504
Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53506
Testing of rubber; determination of needle tear resistance
DIN 53508
Testing of rubber - Accelerated ageing
DIN 53513
Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies
DIN 53530
Testing of organic materials; Separation test on fabric plies bonded together
DIN 53728-3
Prüfung von Kunststoffen; Bestimmung der Viskositätszahl
DIN 53752
Prüfung von Kunststoffen; Bestimmung des thermischen
DIN 53754
Testing of plastics; determination of abrasion, abrasive disk method
DIN 53757
MEBAK Gebinde- und Produktausstattungsmittel,
DIN 53765
DIN EN 60811-405
DIN 53766-1
Testing of glass fibre reinforced plastics apparatus, containers and pipes - Part 1: Determination of traction adhesive strength
DIN 53769-1
Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN 53769-2
DIN 53769-3
Prüfung von Rohrleitungen;aus glasfaserverstärkten Kunststoffen;Teil 3: Kurzzeit- und Langzeit-Scheiteldruckversuch an Rohren;;

DIN 54815-2
DIN 55440-1
Packaging test; compression test; test with a constant conveyance-speed
DIN 55441-2
Packaging test - Impact test - Part 2: Free drop of plastic bottles
DIN 55543-1
Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
DIN 55543-2
Packaging test - Test methods for packaging films - Part 2: Determination of peel resistance of glued seams of sacks
DIN 55543-3
Packaging test - Test methods for packaging films - Part 3: Determination of the strength of longitudinal seams of sacks and bags
DIN 55543-4
Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
DIN 55672-1
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as elution solvent
DIN 60009
Geosynthetics - Determination and testing of the interaction coefficient to the soil using pullout test
DIN 61551
Geosynthetics - Determination of burst strength
DIN 6167
Description of yellowness of near-white or near-colourless materials
DIN 65148
Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test
DIN 65378
Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction
DIN 67530
Reflektometer als Hilfsmittel zur Glanzbeurteilung an ebenen
DIN 73378
Polyamide tubing for motor vehicles
DIN 75200
Determination of burning behaviour of interior materials in motor vehicles
DIN 75201
Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN 7864-1
Sheets of elastomers for waterproofing; terms of delivery
DIN 8061
Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
DIN 8075
Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 8076
Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English
DIN 8078
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing
DIN 8080
Chlorinated polyvinyl chloride (PVC-C) pipes, PVC-C 250 - General quality requirements and testing; chemical resistance
DIN CEN/TS 14416
DIN CEN/TS 14417
DIN CEN/TS 14418
DIN EN 1053
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995
DIN EN 1054
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints; German version EN 1054:1995
DIN EN 1055
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling; German version EN 1055:1996
DIN EN 1081
Resilient floor coverings - Determination of the electrical resistance; German version EN 1081:1998
DIN EN 1087-1
Particleboards - Determination of moisture resistance - Part 1: Boil test; German version EN 1087-1:1995
DIN EN 1107-1
Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing; German version EN 1107-1:1999
DIN EN 1107-2
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1107-2:2001
DIN EN 1109
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature; German version EN 1109:2013
DIN EN 1111
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 1112
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1112:2008
DIN EN 1113
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2015
DIN EN 1119
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN 1119:2009
DIN EN 1177
Impact attenuating playground surfacing - Determination of critical fall height; German version EN 1177:2008
DIN EN 12061
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999
DIN EN 12086
Thermal insulating products for building applications - Determination of water vapour transmission properties; German version EN 12086:2013
DIN EN 12087
Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:2013
DIN EN 12089
Thermal insulating products for building applications - Determination of bending behaviour; German version EN 12089:2013
DIN EN 12091
Thermal insulating products for building applications - Determination of freeze-thaw resistance; German version EN 12091:2013
DIN EN 12106
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
DIN EN 12117
DIN EN 12127
Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN EN 12201-1
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General; German version EN 12201-1:2011
DIN EN 12201-2
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes; German version EN 12201-2:2011+A1:2013
DIN EN 12201-3
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2011+A1:2012
DIN EN 12201-4
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2012
DIN EN 12201-5
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 12201-5:2011
DIN EN 12224
Geotextiles and geotextile-related products - Determination of the resistance to weathering; German version EN 12224:2000
DIN EN 12225
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000
DIN EN 12226
Geosynthetics - General tests for evaluation following durability testing; German version EN 12226:2012
DIN EN 12228
Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013
DIN EN 12229
Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces; German version EN 12229:2014
DIN EN 12230
Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces; German version EN 12230:2003
DIN EN 12234
Surfaces for sports areas - Determination of ball roll behaviour; German version EN 12234:2013
DIN EN 12235
Surfaces for sports areas - Determination of vertical ball behaviour; German version EN 12235:2013
DIN EN 12256
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998
DIN EN 1226
DIN EN 1277
DIN EN 1228
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN EN 12293
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
DIN EN 12294
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
DIN EN 12295
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
DIN EN 12310-1
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of resistance to tearing (nail shank); German version EN 12310-1:1999
DIN EN 12310-2
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12310-2:2000
DIN EN 12311-1
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; Determination of tensile properties; German version EN 12311-1:1999
DIN EN 12311-2
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12311-2:2013
DIN EN 12316-1
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of peel resistance of joints; German version EN 12316-1:1999
DIN EN 12316-2
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2013
DIN EN 12317-1
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of shear resistance of joints; German version EN 12317-1:1999
DIN EN 12317-2
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12317-2:2010
DIN EN 12365-2
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003
DIN EN 12365-3
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method; German version EN 12365-3:2003
DIN EN 12365-4
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method; German version EN 12365-4:2003
DIN EN 12431
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:2013
DIN EN 12447
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2001
DIN EN 12503-6
Sports mats - Part 6: Determination of the top friction; German version EN 12503-6:2001
DIN EN 12608
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U);zur Herstellung von Fenstern;Klassifizierung, Anforderungen und Prüfverfahren;Deutsche Fassung prEN 12608 :1996;;

Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von;Fenstern und Türen;Klassifizierung, Anforderungen und Prüfverfahren;Deutsche Fassung EN 12608:2003;;

DIN EN 12616
Surfaces for sports areas - Determination of water infiltration rate; German version EN 12616:2013
DIN EN 12666-1
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005+A1:2011
DIN EN 12691
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact; German version EN 12691:2006
DIN EN 12730
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading; German version EN 12730:2015
DIN EN 1277
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
DIN EN 12814-1
Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
DIN EN 12814-2
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2000
DIN EN 12814-3
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014
DIN EN 12814-4
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2001
DIN EN 12814-5
Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000
DIN EN 12814-6
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 12814-7
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002
DIN EN 1296
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterprofing - Method for artificial ageing by long term exposure to elevated temperature; German version EN 1296:2000
DIN EN 1297
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water; German version EN 1297:2004
DIN EN 13111
Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration; German version EN 13111:2010
DIN EN 13164
Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification; German version EN 13164:2012+A1:2015
DIN EN 1329-1
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:2014
DIN EN 13341
Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods; German version EN 13341:2005+A1:2011
DIN EN 13415
Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites; German version EN 13415:2010
DIN EN 13476-2
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A; German version EN 13476-2:2007
DIN EN 13476-3
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B; German version EN 13476-3:2007+A1:2009
DIN EN 13501-1
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests; German version EN 13501-1:2007+A1:2009
DIN EN 13562
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydraulic pressure test); German version EN 13562:2000
DIN EN 13583
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance; German version EN 13583:2012
DIN EN 13672
Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf; German version EN 13672:2004
DIN EN 13719
Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers; German version EN 13719:2016
DIN EN 13744
Surfaces for sports areas - Procedure for accelerated ageing by immersion in hot water; German version EN 13744:2004
DIN EN 13746
Surfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost and heat conditions; German version EN 13746:2004
DIN EN 13774
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
DIN EN 13817
Surfaces for sports areas - Procedure for accelerated ageing by exposure to hot air; German version EN 13817:2004
DIN EN 13859-1
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing; German version EN 13859-1:2014
DIN EN 13859-2
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls; German version EN 13859-2:2014
DIN EN 13864
Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004
DIN EN 1389
Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity; German version EN 1389:2003
DIN EN 1393
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
DIN EN 1394
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
DIN EN 13970
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics; German version EN 13970:2004
DIN EN 13984
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics; German version EN 13984:2013
DIN EN 1399
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes; German version EN 1399:1997
DIN EN 1401-1
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1401-1:2009
DIN EN 14030
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) (includes Amendment A1:2003); German version EN 14030:2001 + A1:2003
DIN EN 1411
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996
DIN EN 14150
Geosynthetic barriers - Determination of permeability to liquids; German version EN 14150:2006
DIN EN 14187-3
Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties; German version EN 14187-3:2003
DIN EN 14196
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
DIN EN 14364
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2013
DIN EN 14410
Self adhesive tapes - Measurement of breaking strength and elongation at break; German version EN 14410:2003
DIN EN 14414
Geosynthetics - Screening test method for determining chemical resistance for landfill applications; German version EN 14414:2004
DIN EN 14415
Geosynthetic barriers - Test method for determining the resistance to leaching; German version EN 14415:2004
DIN EN 1447
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010
DIN EN 14477
Packaging, Flexible packaging material - Determination of puncture resistance - Test methods; German version EN 14477:2004
DIN EN 14506
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C; German version EN 14506:2005
DIN EN 1451-1
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998
DIN EN 14525
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004
DIN EN 1455-1
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
DIN EN 14574
Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics; German version EN 14574:2015
DIN EN 14575
Geosynthetic barriers - Screening test method for determining the resistance to oxidation; German version EN 14575:2005
DIN EN 14576
Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking; German version EN 14576:2005
DIN EN 14581
Natural stone test methods - Determination of linear thermal expansion coefficient; German version EN 14581:2004
DIN EN 14598-2
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005
DIN EN 14598-3
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005
DIN EN 14617-10
Agglomerated stone - Test methods - Part 10: Determination of chemical resistance; German version EN 14617-10:2012
DIN EN 14617-11
Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient; German version EN 14617-11:2005
DIN EN 14636
DIN EN 1464
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method; German version EN 1464:2010
DIN EN 1465
Adhesives - Determination of tensile lap-shear strength of bonded assemblies; German version EN 1465:2009
DIN EN 14758-1
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2012
DIN EN 14808
Surfaces for sports areas - Determination of shock absorption; German version EN 14808:2005
DIN EN 14809
Surfaces for sports areas - Determination of vertical deformation; German version EN 14809:2005
DIN EN 14814
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2016
DIN EN 14836
Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering; German version EN 14836:2005
DIN EN 14877
Synthetic surfaces for outdoor sports areas - Specification; German version EN 14877:2013
DIN EN 14879-5
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components; German version EN 14879-5:2007
DIN EN 14882
Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction; German version EN 14882:2005
DIN EN 14909
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics; German version EN 14909:2012
DIN EN 14932
Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods; German version EN 14932:2006
DIN EN 14967
Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics; German version EN 14967:2006
DIN EN 15091
Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2013
DIN EN 1517
Surfaces for sports areas - Determination of resistance of impact; German version EN 1517:1999
DIN EN 1519-1
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
DIN EN 15330-1
Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use; German version EN 15330-1:2013
DIN EN 15381
Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays; German version EN 15381:2008
DIN EN 15382
Geosynthetic barriers - Characteristics required for use in transportation infrastructure; German version EN 15382:2013
DIN EN 1548
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen; German version EN 1548:2007
DIN EN 15534-1
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014
DIN EN 1555-1
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2010
DIN EN 1555-2
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes; German version EN 1555-2:2010
DIN EN 1555-3
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2010+A1:2012
DIN EN 1555-4
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2011
DIN EN 1555-5
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 1555-5:2010
DIN EN 15632-1
District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods; German version EN 15632-1:2009+A1:2014
DIN EN 15632-2
District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods; German version EN 15632-2:2010+A1:2014
DIN EN 15632-3
District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - requirements and test methods; German version EN 15632-3:2010+A1:2014
DIN EN 15651-1
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements; German version EN 15651:2012
DIN EN 15651-2
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing; German version EN 15651-2:2012
DIN EN 15651-3
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints; German version EN 15651-3:2012
DIN EN 15651-4
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways; German version EN 15651-4:2012
DIN EN 1566-1
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
DIN EN 1569
Surfaces for sports areas - Determination of the behaviour under a rolling load; German version EN 1569:1999
DIN EN 1602
Thermal insulating products for building applications - Determination of the apparent density; German version EN 1602:2013
DIN EN 1603
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity); German version EN 1603:2013
DIN EN 1604
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:2013
DIN EN 1605
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:2013
DIN EN 1606
Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:2013
DIN EN 1607
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:2013
DIN EN 1608
Thermal insulating products for building applications - Determination of tensile strength parallel to faces; German version EN 1608:2013
DIN EN 1609
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion; German version EN 1609:2013
DIN EN 16145
Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification; German version EN 16145:2012
DIN EN 16146
Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014
DIN EN 16421
Influence of materials on water for human consumption - Enhancement of microbial growth (EMG); German version EN 16421:2014
DIN EN 1705
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 1847
Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water; German version EN 1847:2009
DIN EN 1848-1
Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing; German version EN 1848-1:1999
DIN EN 1848-2
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1848-2:2001
DIN EN 1849-1
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing; German version EN 1849-1:1999
DIN EN 1849-2
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets; German version EN 1849-2:2009
DIN EN 1850-1
Flexible sheets for roofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing; German version EN 1850-1:1999
DIN EN 1850-2
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1850-2:2001
DIN EN 1852-1
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1852-1:2009
DIN EN 1876-1
Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 1876-2
Rubber or plastics coated fabrics - Low temperatures tests - Part 2: Impact test on loop; German version EN 1876-2:1997
DIN EN 1905
Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998
DIN EN 1928
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; German version EN 1928:2000
DIN EN 1931
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties; German version EN 1931:2000
DIN EN 1939
Self adhesive tapes - Determination of peel adhesion properties; German version EN 1939:2003
DIN EN 1942
Self adhesive tapes - Measurement of Thickness; German version EN 1942:2008
DIN EN 1944
Self adhesive tapes - Measurement of unwind adhesion at low speed; German version EN 1944:1996
DIN EN 1969
Surfaces for sports areas - Determination of thickness of synthetic sports surfaces; German version EN 1969:2000
DIN EN 1979
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
DIN EN 200
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008
DIN EN 2377
Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
DIN EN 246
Sanitary tapware - General specifications for flow rate regulators; German version EN 246:2003
DIN EN 248
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr; German version EN 248:2002
DIN EN 253
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2009+A2:2015
DIN EN 2564
Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998
DIN EN 25978
Rubber- or plastics-coated fabrics; determination of blocking resistance (ISO 5978:1990); German version EN 25978:1993
DIN EN 26591-2
Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985); german version EN 26591-2:1992
DIN EN 27023
Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983); german version EN 27023:1992
DIN EN 277
Sacks for the transport of food aid - Sacks made of woven polypropylene fabric; German version EN 277:1995
DIN EN 27965-1
Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984); german version EN 27965-1:1992
DIN EN 28233
Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN 28510-1
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90° peel; German version EN 28510-1:2014
DIN EN 317
Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993
DIN EN 321
Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001
DIN EN 322
Wood-based panels; determination of moisture content; German version EN 322:1993
DIN EN 432
Resilient floor coverings - Determination of shear force; German version EN 432:1994
DIN EN 438-2
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016
DIN EN 476
General requirements for components used in drains and sewers; German version EN 476:2011
DIN EN 477
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass; German version EN 477:1995
DIN EN 478
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method; German version EN 478:1995
DIN EN 479
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion; German version EN 479:1995
DIN EN 495-5
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing; German version EN 495-5:2013
DIN EN 513
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering; German version EN 513:1999
DIN EN 514
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corner and T-joint; German version EN 514:2000
DIN EN 579
DIN EN 59
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 60112
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
DIN EN 60695-11-10
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-11-10:2013); German version EN 60695-11-10:2013
DIN EN 60695-2-11
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014); German version EN 60695-2-11:2014
DIN EN 60695-2-12
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials (IEC 60695-2-12:2010 + A1:2014); German version EN 60695-2-12:2010 + A1:2014
DIN EN 60695-2-13
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (IEC 60695-2-13:2010 + Cor.:2012 + A1:2014); German version EN 60695-2-13:2010 + A1:2014
DIN EN 607
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German version EN 607:2004
DIN EN 61386-1
Conduit systems for cable management - Part 1: General requirements (IEC 61386-1:2008); German version EN 61386-1:2008
DIN EN 61386-21
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems (IEC 61386-21:2002); German version EN 61386-21:2004 + A11:2010
DIN EN 61386-22
Conduit Systems for cable management - Part 22: Particular requirements - Pliable conduit systems (IEC 61386-22:2002); German version EN 61386-22:2004 + A11:2010
DIN EN 61386-23
Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems (IEC 61386-23:2002); German version EN 61386-23:2004 + A11:2010
DIN EN 61386-24
Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground (IEC 61386-24:2004); German version EN 61386-24:2010
DIN EN 660-1
DIN EN 666
Resilient floor coverings - Determination of gelling; German version EN 666:1994
DIN EN 681-1
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German version EN 681-1:1996 + A1:1998 + A2:2002 + AC:2002 + A3:2005
DIN EN 681-2
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002 + A2:2005
DIN EN 681-4
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements; German version EN 681-4:2000 + A1:2002 + A2:2005
DIN EN 705
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
DIN EN 713
Y
DIN EN 727
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
DIN EN 728
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997
DIN EN 744
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995
DIN EN 765
Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only; German version EN 765:1994
DIN EN 766
Sacks for the transport of food aid - Sacks made of jute fabric; German version EN 766:1994
DIN EN 767
Sacks for the transport of food aid - Sacks made of woven jute/polyolefine fabric; German version EN 767:1994
DIN EN 768
Sacks for the transport of food aid - Sacks made of lined cotton fabric; German version EN 768:1994
DIN EN 769
Sacks for the transport of food aid - Sacks made of woven cotton/polyolefine fabric; German version EN 769:1994
DIN EN 770
Sacks for the transport of food aid - Paper sacks; German version EN 770:1994
DIN EN 802
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
DIN EN 816
Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996
DIN EN 817
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications; German version EN 817:2008
DIN EN 822
Thermal insulating products for building applications - Determination of length and width; German version EN 822:2013
DIN EN 823
Thermal insulating products for building applications - Determination of thickness; German version EN 823:2013
DIN EN 824
Thermal insulating products for building applications - Determination of squareness; German version EN 824:2013
DIN EN 825
Thermal insulating products for building applications - Determination of flatness; German version EN 825:2013
DIN EN 826
Thermal insulating products for building applications - Determination of compression behaviour; German version EN 826:2013
DIN EN 840-1
Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design; German version EN 840-1:2012
DIN EN 840-2
Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design; German version EN 840-2:2012
DIN EN 840-3
Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design; German version EN 840-3:2012
DIN EN 840-4
Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design; German version EN 840-4:2012
DIN EN 840-5
Mobile waste and recycling containers - Part 5: Performance requirements and test methods; German version EN 840-5:2012
DIN EN 840-6
Mobile waste and recycling containers - Part 6: Safety and health requirements; German version EN 840-6:2012
DIN EN 911
DIN EN 917
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN 986
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane; German version EN 986:2005
DIN EN ISO 10147
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011); German and English version EN ISO 10147:2012
DIN EN ISO 10289
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001
DIN EN ISO 10319
Geosynthetics - Wide-width tensile test (ISO 10319:2015); German version EN ISO 10319:2015
DIN EN ISO 10321
Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008
DIN EN ISO 105-01
Textilien - Farbechtheitsprüfungen - Teil P01: Bestimmung der Trockenhitzefixierechtheit (ausgenommen Bügeln) (ISO 105-P01:1993); Deutsche Fassung EN ISO 105-P01:1995
DIN EN ISO 105-02
Textilien - Farbechtheitsprüfungen - Teil N02: Bestimmung der Farbechtheit gegen Bleichen: Peroxid (ISO 105-N02:1993); Deutsche Fassung EN ISO 105-N02:1995
DIN EN ISO 105-04
Textilien - Farbechtheitsprüfungen - Teil N04: Bestimmung der Farbechtheit gegen Bleichen: Natriumchlorit (schwere Beanspruchung) (ISO 105-N04:1993); Deutsche Fassung EN ISO 105-N04:1995
DIN EN ISO 105-05
Textilien - Farbechtheitsprüfungen - Teil X05: Farbechtheit gegen organische Lösemittel (ISO 105-X05:1994); Deutsche Fassung EN ISO 105-X05:1997
DIN EN ISO 105-12
Textilien - Farbechtheitsprüfungen - Teil X12: Farbechtheit gegen Reiben (ISO/FDIS 105-X12:2016); Deutsche und Englische Fassung FprEN ISO 105-X12:2016
DIN EN ISO 10563
Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); German version EN ISO 10563:2005
DIN EN ISO 10590
Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005); German version EN ISO 10590:2005
DIN EN ISO 10591
Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005); German version EN ISO 10591:2005
DIN EN ISO 10722
Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007); German version EN ISO 10722:2007
DIN EN ISO 11058
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010); German version EN ISO 11058:2010
DIN EN ISO 1110
Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995); German version EN ISO 1110:1997
DIN EN ISO 1120
Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012); German version EN ISO 1120:2012
DIN EN ISO 1133-1
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011); German version EN ISO 1133-1:2011
DIN EN ISO 1133-2
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011
DIN EN ISO 11339
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010); German version EN ISO 11339:2010
DIN EN ISO 11357-2
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013), German version EN ISO 11357-2:2014
DIN EN ISO 11357-3
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN EN ISO 11357-6
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008); German version EN ISO 11357-6:2013
DIN EN ISO 11358
Kunststoffe - Thermogravimetrie (TG) von Polymeren - Teil 1: Allgemeine Grundsätze (ISO 11358-1:2014); Deutsche Fassung EN ISO 11358-1:2014
DIN EN ISO 11431
Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002
DIN EN ISO 11432
Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005); German version EN ISO 11432:2005
DIN EN ISO 11501
Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
DIN EN ISO 1158
Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998
DIN EN ISO 1167-1
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); German version EN ISO 1167-1:2006
DIN EN ISO 1167-2
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); German version EN ISO 1167-2:2006
DIN EN ISO 1167-3
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007); German version EN ISO 1167-3:2007
DIN EN ISO 1167-4
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007); German version EN ISO 1167-4:2007
DIN EN ISO 1172
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998
DIN EN ISO 1183-1
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
DIN EN ISO 1183-3
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
DIN EN ISO 11925-2
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010); German version EN ISO 11925-2:2010
DIN EN ISO 12099
Animal feeding stuff, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry (ISO 12099:2010); German version EN ISO 12099:2010
DIN EN ISO 12162
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009); German version EN ISO 12162:2009
DIN EN ISO 12236
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006); German version EN ISO 12236:2006
DIN EN ISO 12572
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); German version EN ISO 12572:2001
DIN EN ISO 12956
Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010); German version EN ISO 12956:2010
DIN EN ISO 12957-1
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005); German version EN ISO 12957-1:2005
DIN EN ISO 12958
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010); German version EN ISO 12958:2010
DIN EN ISO 13229
Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010); German version EN ISO 13229:2011
DIN EN ISO 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010); German version EN ISO 13260:2011
DIN EN ISO 13426-1
Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003
DIN EN ISO 13426-2
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005); German version EN ISO 13426-2:2005
DIN EN ISO 13427
Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014); German version EN ISO 13427:2014
DIN EN ISO 13428
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005); German version EN ISO 13428:2005
DIN EN ISO 13431
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999); German version EN ISO 13431:1999
DIN EN ISO 13433
Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006); German version EN ISO 13433:2006
DIN EN ISO 13438
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004); German version EN ISO 13438:2004
DIN EN ISO 13477
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008
DIN EN ISO 13479
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009); German version EN ISO 13479:2009
DIN EN ISO 13934-1
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013); German version EN ISO 13934-1:2013
DIN EN ISO 13959
Water for haemodialysis and related therapies (ISO 13959:2014); German version EN ISO 13959:2015
DIN EN ISO 13967
Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
DIN EN ISO 13968
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); German version EN ISO 13968:2008
DIN EN ISO 14125
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN ISO 14126
Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999
DIN EN ISO 14129
Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN EN ISO 14130
Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997
DIN EN ISO 1452-1
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009); German version EN ISO 1452-1:2009
DIN EN ISO 1452-2
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009); German version EN ISO 1452-2:2009
DIN EN ISO 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009); German version EN ISO 1452-3:2009
DIN EN ISO 1452-4
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009); German version EN ISO 1452-4:2009
DIN EN ISO 1452-5
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO 1452-5:2009); German version EN ISO 1452-5:2009
DIN EN ISO 14530-2
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN ISO 14530-3
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999
DIN EN ISO 14616
Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997); German version EN ISO 14616:2004
DIN EN ISO 15013
Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007); German version EN ISO 15013:2007
DIN EN ISO 15106-3
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003); German version EN ISO 15106-3:2005
DIN EN ISO 1516
Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002); German version EN ISO 1516:2002
DIN EN ISO 15493
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2003); German version EN ISO 15493:2003
DIN EN ISO 15874-2
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013); German and English version EN ISO 15874-2:2013
DIN EN ISO 15874-3
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013); German and English version EN ISO 15874-3:2013
DIN EN ISO 15874-5
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013); German and English version EN ISO 15874-5:2013
DIN EN ISO 15875-1
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003); German version EN ISO 15875-1:2003
DIN EN ISO 15875-2
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003); German version EN ISO 15875-2:2003
DIN EN ISO 15875-3
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003); German version EN ISO 15875-3:2003
DIN EN ISO 15875-5
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003); German version EN ISO 15875-5:2003
DIN EN ISO 15876-1
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003
DIN EN ISO 15876-2
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003); German version EN ISO 15876-2:2003
DIN EN ISO 15876-3
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003); German version EN ISO 15876-3:2003
DIN EN ISO 15876-5
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003
DIN EN ISO 15977
Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002
DIN EN ISO 1622-2
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999
DIN EN ISO 1628-1
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012
DIN EN ISO 1628-2
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998
DIN EN ISO 1628-3
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010); German version EN ISO 1628-3:2010
DIN EN ISO 1628-5
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998); German version EN ISO 1628-5:2015
DIN EN ISO 16871
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003
DIN EN ISO 16968
Solid biofuels - Determination of minor elements (ISO 16968:2015); German version EN ISO 16968:2015
DIN EN ISO 16995
Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015); German version EN ISO 16995:2015
DIN EN ISO 1716
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010); German version EN ISO 1716:2010
DIN EN ISO 175
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010); German version EN ISO 175:2010
DIN EN ISO 176
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005); German version EN ISO 176:2005
DIN EN ISO 17778
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015); German version EN ISO 17778:2015
DIN EN ISO 178
Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013
DIN EN ISO 179-1
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010
DIN EN ISO 1798
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008); German version EN ISO 1798:2008
DIN EN ISO 180
Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd.1:2006 + Amd.2:2013); German version EN ISO 180:2000 + A1:2006 + A2:2013
DIN EN ISO 182-3
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); German version EN ISO 182-3:2000
DIN EN ISO 182-4
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); German version EN ISO 182-4:2000
DIN EN ISO 1856
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000+Amd 1:2007); German version EN ISO 1856:2000+A1:2007
DIN EN ISO 1872-2
Rohre aus Polyethylen (PE) - PE-HD für drucklose Anwendungen - Allgemeine Güteanforderungen, Maße und Prüfungen; Text Deutsch und Englisch
DIN EN ISO 1873-2
Rasenmäher mit Motor - Handgeführte Sichelmäher - Gebrauchseigenschaften, Anforderungen und Prüfungen
DIN EN ISO 1874-2
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012); German version EN ISO 1874-2:2012
DIN EN ISO 1923
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995
DIN EN ISO 20105-02
Textilien - Farbechtheitsprüfungen - Teil A02: Graumaßstab zur Bewertung der Änderung der Farbe (ISO 105-A02:1993); Deutsche Fassung EN 20105-A02:1994
DIN EN ISO 20105-03
Textilien - Farbechtheitsprüfungen - Teil A03: Graumaßstab zur Bewertung des Anblutens (ISO 105-A03:1993); Deutsche Fassung EN 20105-A03:1994
DIN EN ISO 2039-1
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003
DIN EN ISO 21003-1
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008); German version EN ISO 21003-1:2008
DIN EN ISO 21003-2
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011); German version EN ISO 21003-2:2008 + A1:2011
DIN EN ISO 21003-3
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008); German version EN ISO 21003-3:2008
DIN EN ISO 21003-5
Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008); German version EN ISO 21003-5:2008
DIN EN ISO 22088-1
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006); German version EN ISO 22088-1:2006
DIN EN ISO 22088-2
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006); German version EN ISO 22088-2:2006
DIN EN ISO 22088-3
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method (ISO 22088-3:2006); German version EN ISO 22088-3:2006
DIN EN ISO 22088-4
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006); German version EN ISO 22088-4:2006
DIN EN ISO 22248
DIN EN ISO 22391-2
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009); German version EN ISO 22391-2:2009
DIN EN ISO 22391-3
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009); German version EN ISO 22391-3:2009
DIN EN ISO 22391-5
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009); German version EN ISO 22391-5:2009
DIN EN ISO 2286-1
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016); German version EN ISO 2286-1:2016
DIN EN ISO 2286-2
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2016
DIN EN ISO 2286-3
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
DIN EN ISO 23996
Resilient floor coverings - Determination of density (ISO 23996:2007); German version EN ISO 23996:2012
DIN EN ISO 23997
Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007); German version EN ISO 23997:2012
DIN EN ISO 23999
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008); German version EN ISO 23999:2012
DIN EN ISO 2409
Paints and varnishes - Cross-cut test (ISO 2409:2013); German version EN ISO 2409:2013
DIN EN ISO 24340
Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006); German version EN ISO 24340:2012
DIN EN ISO 24342
Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2007 + Amd.1:2012); German version EN ISO 24342:2012 + A1:2012
DIN EN ISO 24343-1
Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012
DIN EN ISO 24344
Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008); German version EN ISO 24344:2012
DIN EN ISO 24345
Resilient floor coverings - Determination of peel resistance (ISO 24345:2006); German version EN ISO 24345:2012
DIN EN ISO 24346
Resilient floor coverings - Determination of overall thickness (ISO 24346:2006); German version EN ISO 24346:2012
DIN EN ISO 2439
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
DIN EN ISO 2440
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997 + Amd.1:2010 + Amd.2:2014); German version EN ISO 2440:1999 + A1:2010 + A2:2014
DIN EN ISO 2505
Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005
DIN EN ISO 25619-1
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008); German version EN ISO 25619-1:2008
DIN EN ISO 25619-2
Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015); German version EN ISO 25619-2:2015
DIN EN ISO 2811-1
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016); German version EN ISO 2811-1:2016
DIN EN ISO 2815
Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German version EN ISO 2815:2003
DIN EN ISO 29073-3
DIN EN ISO 291
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008); German version EN ISO 291:2008
DIN EN ISO 3035
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011); German version EN ISO 3035:2011
DIN EN ISO 3037
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013); German version EN ISO 3037:2013
DIN EN ISO 305
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999
DIN EN ISO 306
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013); German version EN ISO 306:2013
DIN EN ISO 307
Plastics - Polyamides - Determination of viscosity number (ISO 307:2007 + Amd 1:2013); German version EN ISO 307:2007 + A1:2013
DIN EN ISO 3126
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
DIN EN ISO 3376
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011); German version EN ISO 3376:2011
DIN EN ISO 3385
Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014); German version EN ISO 3385:2014
DIN EN ISO 3386-1
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:1986 + Amd 1:2010); German version EN ISO 3386-1:1997 + A1:2010
DIN EN ISO 3386-2
Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010); German version EN ISO 3386-2:1998 + A1:2010
DIN EN ISO 3451-1
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008); German version EN ISO 3451-1:2008
DIN EN ISO 3451-3
Heizsysteme in Gebäuden - Verfahren zur Berechnung der Norm-Heizlast - Nationaler Anhang NA
DIN EN ISO 3451-4
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998); German version EN ISO 3451-4:2000
DIN EN ISO 3451-5
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002); German version EN ISO 3451-5:2002
DIN EN ISO 3459
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015); German and English version EN ISO 3459:2015
DIN EN ISO 3501
Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2015); German and English version EN ISO 3501:2015
DIN EN ISO 3503
Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
DIN EN ISO 4577
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999
DIN EN ISO 4590
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
DIN EN ISO 4611
Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010); German version EN ISO 4611:2010
DIN EN ISO 4674-1
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016); German version EN ISO 4674-1:2016
DIN EN ISO 4892-2
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013); German version EN ISO 4892-2:2013
DIN EN ISO 4892-3
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016); German version EN ISO 4892-3:2016
DIN EN ISO 50018
DIN EN ISO 527-1
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012); German version EN ISO 527-1:2012
DIN EN ISO 527-2
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN EN ISO 527-3
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002
DIN EN ISO 527-4
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997
DIN EN ISO 527-5
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009); German version EN ISO 527-5:2009
DIN EN ISO 5470-1
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999); German version EN ISO 5470-1:1999
DIN EN ISO 580
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005); German version EN ISO 580:2005
DIN EN ISO 60
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999
DIN EN ISO 604
Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003
DIN EN ISO 62
Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
DIN EN ISO 6259-1
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
DIN EN ISO 6259-3
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015); German version EN ISO 6259-3:2015
DIN EN ISO 6270-2
Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005); German version EN ISO 6270-2:2005
DIN EN ISO 6383-1
Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015); German version EN ISO 6383-1:2015
DIN EN ISO 6427
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013); German version EN ISO 6427:2014
DIN EN ISO 6509-1
Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014); German version EN ISO 6509-1:2014
DIN EN ISO 6603-2
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000
DIN EN ISO 661
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003); German version EN ISO 661:2005
DIN EN ISO 662
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:2016); German version EN ISO 662:2016
DIN EN ISO 663
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2007); German version EN ISO 663:2008
DIN EN ISO 664
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008
DIN EN ISO 665
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000); German version EN ISO 665:2000
DIN EN ISO 6721-1
Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011); German version EN ISO 6721-1:2011
DIN EN ISO 712
Cereals and cereal products - Determination of moisture content - Reference method (ISO 712:2009); German version EN ISO 712:2009
DIN EN ISO 7389
Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002); German version EN ISO 7389:2003
DIN EN ISO 7390
Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002); German version EN ISO 7390:2003
DIN EN ISO 7391-2
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006); German version EN ISO 7391-2:2006
DIN EN ISO 75-1
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013); German version EN ISO 75-1:2013
DIN EN ISO 75-2
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013
DIN EN ISO 75-3
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
DIN EN ISO 7619-1
DIN EN ISO 7686
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005); German version EN ISO 7686:2005
DIN EN ISO 7765-1
Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988); German version EN ISO 7765-1:2004
DIN EN ISO 787
DIN EN ISO 787-2
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:1981); German version EN ISO 787-2:1995
DIN EN ISO 787-7
General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009); German version EN ISO 787-7:2009
DIN EN ISO 787-9
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:1981); German version EN ISO 787-9:1995
DIN EN ISO 815-1
Elastomere oder thermoplastische Elastomere - Bestimmung des Druckverformungsrestes - Teil 1: Bei Umgebungstemperaturen oder erhöhten Temperaturen (ISO 815-1:2014)
DIN EN ISO 8256
Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN ISO 8295
Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995); German version EN ISO 8295:2004
DIN EN ISO 8339
Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005); German version EN ISO 8339:2005
DIN EN ISO 8340
Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005
DIN EN ISO 8394-1
Building construction - Jointing products - Part 1: Determination of extrudability of sealants (ISO 8394-1:2010); German version EN ISO 8394-1:2010
DIN EN ISO 8394-2
Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010); German version EN ISO 8394-2:2010
DIN EN ISO 844
Rigid cellular plastics - Determination of compression properties (ISO 844:2014); German version EN ISO 844:2014
DIN EN ISO 845
Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006); German version EN ISO 845:2009
DIN EN ISO 846
Plastics - Evaluation of the action of microorganisms (ISO 846:1997); German version EN ISO 846:1997
DIN EN ISO 8510-2
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006); German version EN ISO 8510-2:2010
DIN EN ISO 868
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN EN ISO 899-1
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003 + Amd.1:2015); German version EN ISO 899-1:2003 + A1:2015
DIN EN ISO 899-2
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015
DIN EN ISO 9046
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004
DIN EN ISO 9047
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001 + Cor. 1:2009); German version EN ISO 9047:2003 + AC:2009
DIN EN ISO 9054
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999
DIN EN ISO 9080
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012); German and English version EN ISO 9080:2012
DIN EN ISO 9227
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2012); German version EN ISO 9227:2012
DIN EN ISO 9311-3
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005
DIN EN ISO 9773
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003
DIN EN ISO 9862
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005); German version EN ISO 9862:2005
DIN EN ISO 9863-1
Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016); German version EN ISO 9863-1:2016
DIN EN ISO 9864
Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005); German version EN ISO 9864:2005
DIN EN ISO 9967
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN EN ISO 9969
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016
DIN IEC 60093
Prüfverfahren für Elektroisolierstoffe, Spezifischer Durchgangswiderstand
DIN ISO 11465
Bodenbeschaffenheit -Bestimmung der Trockensubstanz und
DIN ISO 11527
Building construction - Sealants - Test method for the determination of stringiness (ISO 11527:2010)
DIN ISO 132
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:2011)
DIN ISO 16938-1
Building construction - Determination of the staining of porous substrates by sealants used in joints - Part 1: Test with compression (ISO 16938-1:2008)
DIN ISO 16938-2
Building construction - Determination of the staining of porous substrates by sealants used in joints - Part 2: Test without compression (ISO 16938-2:2008)
DIN ISO 1817
Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
DIN ISO 2285
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)
DIN ISO 23529
Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2010)
DIN ISO 3384
Kautschuk, vulkanisiert oder thermoplastisch;Bestimmung der Spannungsrelaxation unter Druck;bei Umgebungs- und erhöhten Temperaturen;(ISO 3384:1999 + Amd. 1:2001);;

DIN ISO 34-1
Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2015)
DIN ISO 3865
DIN ISO 4649
Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
DIN ISO 48
Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)
DIN ISO 6133
Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN ISO 7619-2
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method (ISO 7619-2:2010)
DIN ISO 7765-2
Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994)
DIN ISO 812
Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2011)
DIN ISO 813
Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method (ISO 813:2010)
DIN ISO 815-2
Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014)
DIN ISO 8296
Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003)
DIN V 18032-2
DIN EN 14904 2006-06
DN 10
DN 100
DN 15
DN 250
DVGW G 5600-1
Werkstoffübergangsverbinder aus Metall für Gasrohrleitungen aus
DVGW G 5628
DVGW GW 335-1
Kunststoff-Rohrleitungssysteme in der Gas-und Wasser-verteilung;
DVGW GW 335-2
Kunststoff-Rohrleitungssysteme in der Gas-und Wasser-verteilung;
DVGW GW 335-3
Kunststoff-Rohrleitungssysteme in der Gas-und Wasser-verteilung;
DVGW GW 335-3-B1
DVGW GW 335-3-B2
DVGW GW 335-4
DVGW GW 335-5
DVGW GW 335-6
DVGW GW 335-83
DVGW VP 302
Gas-Absperrarmaturen aus Polyethylen (PE 80 und PE 100) -Anfor
DVGW VP 304
DVGW VP 600
DVGW VP 652
DVGW W 270
DVGW W 320
Kunststoffrohre für die Wasserversorgung; Druckrohre aus Polyethylen
DVGW W 534
Strömungswiderstand
DVGW W 542
Verbundrohre in der Trinkwasser-Installation
DVGW W 544
Kunststoffrohre in der Trinkwasser-Installation
DVGW W 574
Sanitärarmaturen als Entnahmearmaturen für Trinkwasser
DVS 2201-1
DVS 2201-2
DVS 2201-2
DVS 2202-1
Fehler an Schweißverbindungen aus thermoplastischen Kunststoffen
DVS 2203-2
Prüfen von Schweißverbindungen an Tafeln und Rohren aus
DVS 2203-3
DVS 2203-4
DVS 2203-4
DVS 2203-5
Prüfen von Schweißverbindungen an Tafeln und Rohren aus
DVS 2203-6
Prüfen von Fügeverbindungen aus polymeren Kunststoffen -Torsions-
DVS 2206-1
DIN EN ISO 17637
DVS 2207-25
DVS 2211
Schweißen von thermoplastischen Kunststoffen ‐Schweißzusätze 
DVS 2215-1
DVS 2225-2
Fügen von Dichtungsbahnen aus polymeren Werkstoffen im Erd
DVS 2225-4
Schweißen von Dichtungsbahnen aus Polyethylen (PE) für die
DVS 2225-5
DVS 2226-2
Prüfung von Fügeverbindungen an Dichtungsbahnen aus
DVS 2226-3
Prüfung von Fügeverbindungen an Dichtungsbahnen aus
DVS 2226-4
Prüfen von Fügeverbindungen an Dichtungsbahnen aus poly
DVS 2227-1
EN 12118
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
EN 13341-1
EN ISO 15874-1
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
ETAG 005
Bausätze für flüssig aufzubringende Dachabdichtungen
ETAG 010
FLTM BO 116-01
GM GME 60292
GM GMW 14162
GM GMW 14170
GM GMW 14650
GRI GG 2
Normprüfverfahren zur Bestimmung der Knotenfestigkeit von
GRI GG 8
GRIS GV 15
GRIS GV 16
GRIS GV 19
GW 335-3
ISO 10508
Plastics piping systems for hot and cold water installations - Guidance for classification and design
ISO 10838-1
ISO 10838-2
ISO 11173
Thermoplastics pipes - Determination of resistance to external blows - Staircase method
ISO 11359-2
Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 1163-2
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 12091
Structured-wall thermoplastics pipes - Oven test
ISO 13254
Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 13255
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
ISO 13257
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
ISO 13259
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
ISO 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
ISO 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
ISO 13480
Polyethylene pipes - Resistance to slow crack growth - Cone test method
ISO 13951
Plastics piping systems - Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
ISO 13953
Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint
ISO 13954
Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955
Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
ISO 13956
Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test
ISO 13957
Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance
ISO 14236
ISO 14531-1
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels; Metric series; Specifications - Part 1: Pipes
ISO 14531-2
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing
ISO 14531-3
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
ISO 14828
ISO 1628-4
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials
ISO 1628-6
Plastics; determination of viscosity number and limiting viscosity number; part 6: methyl methacrylate polymers
ISO 16486-1
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
ISO 16486-2
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes
ISO 16486-3
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
ISO 16486-5
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system
ISO 16770
Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)
ISO 17454
Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig
ISO 17456
Plastics piping systems - Multilayer pipes - Determination of long-term strength
ISO 17467-2
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 2: Pipes
ISO 17467-3
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings
ISO 1763
Carpets; Determination of number of tufts and/or loopsn per unit length and per unit area
ISO 17885
Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
ISO 18488
Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
ISO 18553
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
ISO 1922
Rigid cellular plastics - Determination of shear strength
ISO 19893
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
ISO 2248
Packaging; Complete, filled transport packages; Vertical impact test by dropping
ISO 2528
Sheet materials - Determination of water vapour transmission rate - Gravimetric (dish) method
ISO 2796
Cellular plastics, rigid; Test for dimensional stability
ISO 2896
Rigid cellular plastics - Determination of water absorption
ISO 3127
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 3341
Textile glass - Yarns - Determination of breaking force and breaking elongation
ISO 3387
Rubber - Determination of crystallization effects by hardness measurements
ISO 37
Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 3795
Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 4427-1
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
ISO 4427-2
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
ISO 4427-3
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
ISO 4427-5
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
ISO 4437
ISO 4439
Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density
ISO 4591
Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 4592
Plastics; film and sheeting; determination of length and width
ISO 4593
Plastics; film and sheeting; determination of thickness by mechanical scanning
ISO 4603
Textile glass; woven fabrics; determination of thickness
ISO 5208
Industrial valves - Pressure testing of metallic valves
ISO 6964
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO 7616
Cellular plastics, rigid; Determination of compressive creep under specified load and temperature conditions
ISO 7724-2
ISO 7724-3
Lacke und Anstrichstoffe; Farbmessung; Teil 3: Berechnung von
ISO 8361-1
Thermoplastics pipes and fittings; water absorption; part 1: general test method
ISO 8483
Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints
ISO 8533
Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Test methods to prove the design of cemented or wrapped joints
ISO 9352
Plastics - Determination of resistance to wear by abrasive wheels
ISO 9854-1
Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method
ISO 9854-2
Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials
ISO 9924-1
Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-2
Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
ITTF T3
ITTF T4
KRV A 2.6.10
MS 210-05
MVSS 302
UL 94
ONR 20513
PAS 1075
PA U 160
PB 125
PE 100
DVGW GW 335-A2-B1
PE 63
PE 80
PN 10
PP B 80
PP H 100
PP R 80
PV 1303
ISO 7724-2
PVC C 200
R 592012
RAL GZ 713/2
RAL GZ 716/1
RAL GZ 951/1
RAL GZ 951/2
S 2073
SAE J2412
M
SAE J2527
SKZ FL 5.2
SKZ FS 1.1
SKZ FS 1.1
SKZ FS 1.2
SKZ FS 2.1
SKZ FS 2.4
SKZ FS 5.3
SKZ FS 5.5
SKZ HF 2.3
SKZ HR 3.10
SKZ HR 3.12
SKZ HR 3.13
SKZ HR 3.16
SKZ HR 3.17
SKZ HR 3.19
SKZ HR 3.2
SKZ HR 3.21
SKZ HR 3.23
SKZ HR 3.24
SKZ HR 3.26
SKZ HR 3.26
SKZ HR 3.28
SKZ HR 3.28
SKZ HR 3.31
SKZ HR 3.3
SKZ HR 3.31
SKZ HR 3.33
SKZ HR 3.34
SKZ HR 3.34
SKZ HR 3.35
SKZ HR 3.37
SKZ HR 3.39
SKZ HR 3.4
SKZ HR 3.40
SKZ HR 3.42
SKZ HR 3.43
SKZ HR 3.44
SKZ HR 3.47
SKZ HR 3.48
DIN EN 200
SKZ HR 3.7
SKZ HR 3.9
SKZ SP 7.1
SKZ SP 7.2
ISO 2248
SN EN ISO 1452-2
SN EN ISO 1452-3
SN EN ISO 1452-4
SN EN ISO 1452-5
STD 1027
STD 423-0047
SVGW W/TPW 109
SVGW W/TPW 110
SVGW W/TPW 125
SVGW W/TPW 127
SVGW W/TPW 129
SVGW W/TPW 134
SVGW W/TPW 142
SVGW W/TPW 143
TCS 1112.1
TCS 1113.2
TCS 1212.6
TCS 1312.2
TCS 1312.9
TCS 1314.1
TCS 1314.10
TCS 1314.11
TCS 1314.12
TCS 1314.13
TCS 1314.14
TCS 1314.15
TCS 1314.7
TCS 1314.8
TCS 1314.8
TCS 1314.9
TCS 1412.1
TCS 1611.5
TCS 2114.2
TCS 2211.2
TCS 4001.13
TCS 5011.1
TCS 6001.1
U 180
UL 94
VDA 270
VCS 1027
VDA 270
Messgröße / Prüfgerät
VDA 4500
ISO 8339
VDE 0303-11
VGW/GRIS PW 405/1
VGW PW 302
VKR RL 01-10
ZP 10.10.1
ZP 10.14.1
ZP 10.18.1
ZP 10.2.1-8
ZP 10.4.1-8
ZP 1.1.1
ZP 12.1.10
ZP 12.3.10
Rohrleitungsteile aus PE-HD für Druckrohrleitungen
ZP 1.3.1
ZP 1.3.32
ZP 14.3.1
ZP 14.6.36
ZP 16.19.8
ZP 2.12.1-8
ZP 30.5.1
ZP 30.5.2
ZP 30.5.3
ZP 3.1.38
ZP 5.1.1
ZP 6.10.1
ZP 6.14.1
ZP 7.1.15
Coextrudierte, kerngeschäumte Rohre und Formstücke aus modi
ZP 7.1.16
ZP 7.1.1-8
ZP 7.1.15
ZP 7.1.19
ZP 7.3.1-8
ZP 7.4.12
ZP 7.4.18
ZP 7.4.37

SKZ - Das Kunststoffzentrum is currently available.

Request this lab for your testing project now. After submitting your request, you will be able to add more labs anytime:

Lab location:

97076, Würzburg, Germany

Image gallery:

Click image to zoom in.